Clue required, please. I've never had XF86 give me an error like this one.
I just completed transferring my existing hardware to a new case/motherboard.
If it matters, I went from a P90 to a dual P133. I moved over the disks, RAM
and boards - everything but the P90 motherboard.
Everything works fine after the move, except X - errors and my XF86config are
attached. Prior to moving my hardware into the new case, I pulled out a spare
SCSI controller and disk and did a fresh install of Hamm onto the new
machine. I got X working using my main monitor (the XE17 referenced in the
config) and a spare #9 Motion 771 I had lying around. I had the new machine
running fine like that for a week and then I moved the hardware. After the
move, I deleted the device section for the 771, copied over (from memory, I
admit) the XE17's monitor section and made the appropriate changes to the
screen section of the XF86config. In addition, I'd had the STB Nitro working
(and very well at that) in the P90 for several months prior to the hardware
move using the Dell VS17 referenced in the config. So, I've had both the XE17
and the Nitro working, but never both together.
Other possibly useful info:
logos:/misc/losers/peewee ] dpkg -s xserver-svga
Package: xserver-svga
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 2877
Maintainer: Branden Robinson <[EMAIL PROTECTED]>
Source: xfree86
Version: 3.3.2.2-1
Replaces: xbase (<= 3.3.2-4)
Provides: xserver
Depends: makedev (>= 1.6-8), libc6, zlib1g
logos:/misc/losers/peewee ] uname -a
Linux logos 2.1.106 #1 SMP Sun Jun 14 14:17:44 PDT 1998 i586 unknown
PeeWee
--
email: [EMAIL PROTECTED] - useless: http://www.scc.mi.org/peewee/ - efnet: Pwe
"Persons with names like Sierra or Sequoia will not be permitted to sing the
blues no matter how many men they shoot in Memphis." -Mike Avery
XFree86 Version 3.3.2 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: March 2 1998
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.32 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 0):
NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
ct64300, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: MicroSoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3
(**) SVGA: Graphics device ID: "ViRGE GX"
(**) SVGA: Monitor ID: "NEC XE17"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/cyrillic/"
(--) SVGA: S3 ViRGE chipset: please load "libs3v.a" module
(--) SVGA: CHIPS: chip revision: 6
(--) SVGA: Chipset: ct65530
(--) SVGA: CHIPS: no monitor detected.
(**) SVGA: CHIPS: 4096 kB VRAM
(--) SVGA: CHIPS: TFT probed.
(--) SVGA: CHIPS: CRT
(--) SVGA: CHIPS: PI Bus
(--) SVGA: CHIPS: Depth 16 only supported with linear addressing
(--) SVGA: chipset: generic
(**) SVGA: videoram: 4096k
(--) SVGA: clocks: 25.18
(**) SVGA: 16bpp not supported for this chipset
*** A configured device found, but display modes could not be resolved.***
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
