I'm using a i386 portable with 2.0.34 installed. I have a requirement to
plug this machine into various subnets, depending on where I'm working
within my organisation.
Is there a way to configure the system so that I can use
(a) 4 or 5 different gateways (only one of which will be reachable at one
time) and
(b) 4 or 5 IP numbers, only one of which will be valid at any one time?
An example:
IP Gateway
111.222.1.1 111.222.1.254
111.222.2.5 111.222.2.254
111.222.10.2 111.222.10.254
111.222.200.210 111.222.200.254
<all configured, all accessable, not reconfiguring & rebooting>
IP Aliasing seems to only work within the same subnet, and has to be
re-initialised at each bootup.
many thanks...
----** Ian Stuart
Land Rover : A British car that was meant to survive the charge of an
adult bull rhino and be field-stripped in the jungle with essentially
a screw-driver and a crescent wrench.
WWW: http://www.tardis.ed.ac.uk/~kiz/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
