I'm attempting to install the 2.0.6 disk image on a Dell 433/M (486 processor). This machine appears to have VGA video integrated on the motherboard. It has a mono monitor.
The machine has an Adaptec 1510 or 1520 SCSI card and one SCSI disk. I have tested the boot disk on another machine, and I have read it on this machine (which currently has SCO Unix on it), so I know that this disk is OK. It displays 'Loading root.bin...' and then blanks the screen (which does not happen on the other, non-Dell machine on which I tested this disk.) The floppy continues to be read for a while; I think that it is probably getting as far as the first screen of the installation, but the screen continues blank. I have tried entering `M' and `C' at this point, but without success. Has anyone any suggestions on how to get round this, please? Are there any boot options I can include to change the behaviour of the machine? -- Oliver Elphick [EMAIL PROTECTED] Isle of Wight http://www.lfix.co.uk/oliver PGP key from public servers; key ID 32B8FAA1 ======================================== "And Jesus answering said unto them, They that are whole need not a physician; but they that are sick. I come not to call the righteous, but sinners to repentance." Luke 5:31,32 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
