OK, I know I have a strange configuration but I like it. Here is my configuration:
HP Pavilion 7126 computer 32 meg ram 2 IDE hard drives with a IDE CD-ROM hda = 1.65 GIG IDE hdb = 500 Meg IDE hdc = CD-ROM 1 SCSI hard drive and 1 4 MM tape drive driven by an Adaptec 1520 card sda = 1 GIG SCSI ID 0 Tape drive SCSI ID 6 External modem internal sound system and vidio Now for the problem. I messed up my Debian install that I had on 2 partitions on the 2 IDE hard drives. I also have OS/2 and DOS running on the IDE hard drives. Since I have blowen away my Debian and I was in the middle of installing it anyway, I figured that I would put the new install on the SCSI hard drive. My old install I had configured to go to the MBR on hda. It worked fine. So I tried to do that with this one. Lilo tells me there is a problem with hdc (my CD-ROM) and run MAKEDEV-IDE, but it does say that it is adding my boot labels. When I rebooted it, all I get on the screen is Li. So, I got my OS/2 boot manager back and I configured it for the SCSI and it will not show on the menu. Can anyone give me some help on this? I need to get one of the boot managers working. I am thinking about reinstalling again because of the strange error I got but I do not know if that is a good thing to do at this time or not. Thanks for the help. Brian Schramm -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
