> Could someone tell me how to setup my printcap for a bjc4000 printer.
> I'm a newbie, so please be gentle. I need to be able to print
> ghostscript files.
I use a bjc600 as follows:
In /etc/printcap :
lp:\
:lp=/dev/lp1:\
:sd=/var/spool/lpd/lp1:\
:if=/etc/filter.bjc600:\
:af=/var/log/lp-acct:\
:lf=/var/log/lp-errs:\
:mx#0:\
:sh:
And in /etc/filter.bjc600 :
#!/bin/sh
/usr/bin/gs -q \
-sDEVICE=bjc600 \
-r360x360 \
-sPAPERSIZE=letter \
-dNOPAUSE \
-dSAFER \
-sOutputFile=- -
I suspect this should also work for a 4000, assuming it's a /dev/lp1...
Regards,
Rich
----------------------------------------------------------------------
Richard A Sahlender Jr Consultant Room #
Lucent Technologies Bell Laboratories 2R-264
1247 South Cedar Crest Boulevard, Allentown, Pennsylvania 18103-6209
VOICE: 610-712-2303 FAX: 610-712-2773 EMAIL: [EMAIL PROTECTED]
----------------------------------------------------------------------
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
