On Wed, Jan 14, 1998 at 09:04:25AM -0300, [EMAIL PROTECTED] wrote: > ipx_configure --auto_interface=on --auto_primary=on --No error > > /proc reports > infinito# cat /proc/net/ipx > Local_Address Remote_Address Tx_Queue Rx_Queue State Uid > > infinito# cat /proc/net/ipx_interface > Network Node_Address Primary Device Frame_Type > 00000213 0020AFF592A0 Yes tr0 802.2TR > > infinito# cat /proc/net/ipx_route > Network Router_Net Router_Node > 75213033 00000213 08005A0BD26D > 75213005 00000213 08005A6C0C85 > 00000213 Directly Connected
This looks fine. > i got TCP/IP working with a Token Ring adapter. > > BUT slist reports > sometimes this > infinito# slist: Unknown code ____ 255 in ncp_initialize This usually occurs when ncpfs doesn't think IPX knows any routes, eg before the auto_primary stuff has taken effect, although it seems to have already from the proc files you've shown. Perhaps ncpfs doesn't support tr devices? There's no reason why it shouldn't, but maybe the support just hasn't been written. Contact the ncpfs author to find out for sure, or the appropriate mailing list if there is one. Hamish -- Hamish Moffatt, [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Latest Debian packages at ftp://ftp.rising.com.au/pub/hamish. PGP#EFA6B9D5 CCs of replies from mailing lists are welcome. http://hamish.home.ml.org -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
