On Thu, 27 Nov 1997, Kevin Traas wrote: : I should also ask about the Mylex DAC960PD. Or, are there any other : Ultra-SCSI RAID controllers supported in Linux? : : >Can anyone recommend an Ultra SCSI controller that works under Linux? : > : >I'm looking to hang several of the new 18GB Barracuda/Cheetah Seagate : drives : >off of one... : > : >I'm currently looking at the BusLogic Flashpoint BT-950. : > : >Is anyone using this card? Any comments? :
The DPT 3334/UW works like a dream in Linux, although you do have to configure it with the DOS config tools. I've never tried running the SCO tool under iBCS ... never was a big deal for me. YMMV. As far as UW SCSI controllers go, I've used two: the Adaptec 2940UW and a NCR 53c875 (Symbios, this one is tainted by Compaq stuff). I was pleased with the 2940UW, but I've heard horror stories. We ran two 4 gig Barracudas on that controller. The NCR is in a brand new Compaq Prosignia box. It seems to be doing fine, no surprises or weirdness, except when compiling a new kernel; you have a choice for a driver called NCR 52C7,8xx which seems like it would drive this card. it doesn't. Worse, if you include that driver you don't get the choice to include the NCR 53C8xx driver, which is the correct one. Took me a while to figure that out. I've read a lot of good things about Buslogic SCSI cards, but I have no first hand experience with them. -- Nathan Norman MidcoNet - 410 South Phillips Avenue - Sioux Falls, SD 57104 phone: (605) 334-4454 fax: (605) 335-1173 mailto://[EMAIL PROTECTED] http://www.midco.net PGP Key ID: 0xA33B86E9 - Public key available at keyservers PGP Key fingerprint: CE03 10AF 3281 1858 9D32 C2AB 936D C472 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
