Vladislav, Even though it says that it has HP 500C emulation, this just means that it will emulate the printer once it has been sucessfully configured by the operating system. This printer uses a Host based Windows printing system. The printer does not function under any operating systems/environments than Windows 3.x and Windows 95. I've been testing it under DOS and NT 4.0. It does not work under either of these. The printer requires a device driver in order to function. You will see the same effect if you boot under DOS and try to copy a file to the LPT port. Nothing will be printed on the printer.
Steve Mayer [EMAIL PROTECTED] Vladislav Papayan x285 wrote: > The docs say that it has hp 500c emulation -- so I was thinking > to get it working based on that -- however I am not sure if can use all > the available resolution. > > Vladislav > > >---------- > >From: Steve Mayer[SMTP:[EMAIL PROTECTED] > >Sent: Monday, September 22, 1997 2:55 PM > >To: Vladislav Papayan x285 > >Cc: The recipient's address is unknown. > >Subject: Re: [Q] How to Print in DEBIAN > > > >Vladislav, > > > > As far as I know, the Lexmark 7000 will only work under Windows 3.x > >and > >Windows 95. It provides a DOS interface only under Windows through a > >driver. You cannot boot to true DOS and use the printer. It also has > >no NT > >or OS/2 drivers. I doubt that out of the box the printer will work > >with > >Linux. If somone knows different, please let me know. > > > >Steve Mayer > >[EMAIL PROTECTED] > > > >Vladislav Papayan x285 wrote: > > > >> Hi , > >> I just bought Lexmark 7000 (1200x1200 dpi) -- I have > >> StarOffice installed -- how do I print? > >> > >> I read print howtos -- but I still do not understand what > >> I have to do to get it work. > >> > >> I installed gs-alladin.deb packages -- I also installed > >> magicfilters. But I have no clue were to specify what printer > >> I use and what port it is on. I looked at /etc/printcap -- but > >> there is no line to uncomment or add to say the printer name. > >> > >> I was also discouraged by the fact that Lexmark made their printer > >> only compatible with windows. However, I found that the printer > >> emulates hp 500C commands -- so I would like to get it work at least > >> with that. If it does not work I will return it and by Epson 800 Stylus > >> -- I hope that one will work. > >> > >> If you have any suggestions, please respond as soon as you can > >> because I have to return the printer within 7 days -- if I do not > >> like it. > >> > >> Thanks in advance, > >> Vladislav > >> > >> -- > >> TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > >> [EMAIL PROTECTED] . > >> Trouble? e-mail to [EMAIL PROTECTED] . > > > > > > > > > >-- > >TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > >[EMAIL PROTECTED] . > >Trouble? e-mail to [EMAIL PROTECTED] . > > > > -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
