Min-Woo Bahk wrote: > > Hello. > > This is Minu, working in Nat'l University of mongolia as computer > professor. We have freewave wireless modem to connect internet. > > The modem is connected to router that formed by debian linux system, and > server is a sun sparc station5. This network system is consist of 20 > computers via 3 hubs. > > A few days ago, router machine was broke down by electric shock. So I > checked all system and made sure for working good. Now all system do > well except for modem connections. > > I wanna know how to make configuration for modem and get more > information about modem. > > I'll send specificatoin of modem. PLS Let me know how to do it! > > Thanks.. > > < Wireless Modem > > > Freewave Wireless data transceiver > FCC ID : KNY-DGR-115 > DOC 2329101340A > MODEL NUMBER : DGR-155H > Serial NUMBER : 570-0801 >
Hello. This type of hardware can be easily damaged by electric shock. Are you sure the modem is not damaged? Your hardware is manufactured by FreeWave: FreeWave Technologies, Inc. 1880 South Flatiron Court Boulder, CO 80301 USA web: http://www.freewave.com/ email: [EMAIL PROTECTED] telephone: (303) 444-3862 (303) 786-9948 Fax Your "modem" might have been obtained from NTI in Taiwan: http://www.nit.com.tw/ http://www.nit.com.tw/FAQ.htm#10. This site appears to be chinese language only, and might be helpful. This device is not a "modem", but it can use an AT command set. The AT commands are used by modem software such as the debian "pon" and "poff" scripts, and the linux "diald" deamon. I hope this helps... Good Luck! --ed. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
