I've run into the same thing. Using IP addresses vice-versa to the suggestion in the options.ttyXX file works for me. The options.ttyXX suggestion is wrong - I just never got around to finding out whether this has been reported as a bug....
Later, Kevin Traas Systems Analyst Baan Business Systems > # Example: > # options.ttyS1 for com2 under DOS. > # > # Edit the following line so that the first IP address > # mentioned is the ip address of the serial port while the second > # is the IP address of your host > > As far as I can tell, this is wrong? Either that or something is really > screwed up here. When I tried this setup it didn't work. When I listed > the host first, and then the serial port, it did work. I used IP > addresses though, this was suggested in a README I found. When I say it > "worked" I mean that I could connect and communicate with any servers > local to my LAN. I haven't yet solved the original problem. > > If someone can verify that the example given in the file is correct, > could you email me with a sample configuration so I can see how it was > intended to be set up? I've shown a few people my configs and they seem > to look ok. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
