On Thu, 10 Jul 1997, dpk wrote: > I don't have much experience with having two ethernet cards in a machine,
I've a little now that I've had to play with a few machines (one has 4 ethernet cards and 1 radio card!) > My ifconfig also says 10mb because the tulip driver first probes 10mb. > However, after boot up, once I start sending packets it says "Enabling > 100TX port" despite the fact it says 10mb on ifconfig. Also, my download > capabilities have shown it. ( On our internal network I can download up > to 1.3 MB/sec =), my scsi hard drive griding as fast as possible the whole Well I've got this problem solved now. It seems that the switch port I was testing on was stuffed. Moving to another one I get wonderful performance. On a 100Mb/s port I can get it working at both half and full duplex, with ftp transfers of 3.8 MB/s (which translates to about 30Mb/s, the other machine for the ftp is only on half duplex) on a 100 MB file which is excellent! The other card is still happy at 10Mb/s. And it's all autodetect too, no options needed. 8<--------------------------------------->8 Richard Shepherd ([EMAIL PROTECTED]) 8<--------------------------------------->8 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] .
