Martin Schulze wrote:
>
> Jens B. Jorgensen writes:
>
> > > Check your config files in /etc/mgetty, are you sure that you
> > > have a fax modem? I'm not a modem expert but I seem to remember
> > > that there are some modems that cannot fax - or at least cannot
> > > fax at level 3 which is needed for sendfax (USR SportSter might
> > > be such a modem).
>
> > Actually, the problem with fax modems and sendfax is not generally
> > that they can't handle >>group<< 3 fax files, but that they don't
> > support Class 2 or Class 2.0 fax transmission. My fax-modem only
>
> Err, that's what I tried to say/remember. I'm not a modem expert...
That's ok. I was trying to make this correction *and* be nice! 8)
> > supports Class 1. I use mgetty and although since it does not support
> > Class 1 I cannot receive faxes, I can send them easily with the
> > excellent efax package.
>
> Sendfax can only handle Class 2, IIRC Class 1 is time critical which
> cannot guaranteed under unix.
Yada, yada, yada. I believe you are correct. I've never had a problem
though!! Hey, nothing in life is "guaranteed". Also, since we're being
picky, sendfax can handle class 2 & class 2.0, which are not the same
thing, class 2 being an industry "de facto" standard which became
widely used before the official standard, (2.0) was deployed.
> > That said, your problem may not be that it doesn't support class
> > 2/2.0 (which mgetty requires, as I have stated). Since you have
> > logging turned on ('-x 5') why don't you post the log here? You should
> > find it in /var/log/mgetty.
> >
> > NOTE: USR Sportster (at least my 28.8) supports class 1 & 2.0. If you
> > want to see what classes your modem supports, get into a COM program
> > (in DOS/Win/Linux doesn't matter) and give your modem the command:
> >
> > AT+FCLASS=?
> >
> > It should print a list of what classes it supports.
>
> Ah, interesting, hopefully I'm also allowed to use minicom, cu or
> kermit as I have Linux installed and I'm not going to install Dos :-)
> Fine, it can handle 2.0, too. I might want to expand our Fax service.
> Thanks a lot!!!
Cool. Save trees! Why print to paper? Why print something in Word/Lyx
just to stick it in the fax machine and then toss the hardcopy? I've
been meaning to set up a "fax server" here where all faxes are received
via modem and then a thumbnail image is generated and emailed to certain
people (with MIME and html content) and a URL is stuck in there which
goes to the server allowing them to view the full-size image and allow
them to print, delete, or hold on to the fax. Especially since we get
a lot of "junk" faxes, this would reduce paper wastage quite a bit.
--
Jens B. Jorgensen
[EMAIL PROTECTED]
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
[EMAIL PROTECTED] .
Trouble? e-mail to [EMAIL PROTECTED] .
