Hello All,
Does anybody get working multiserial card in Debian? I'm trying
to install Moxa C168P card (actually two) in my box running woody,
fresh install, kernel-image-2.4.18-686 with devfs. I've configured
these cards with io_irq.exe under dos: one card has CAP: 0x300 and IRQ:5
and another's CAP: 0x180 and IRQ:10.
When I'm trying to insmod mxser it complains about this:
Nov 26 15:35:04 ial kernel: Loading module mxser ...
Nov 26 15:35:04 ial kernel: MOXA Smartio family driver version 1.2
Nov 26 15:35:04 ial kernel: Tty devices major number = 174, callout devices major
number = 175
Nov 26 15:35:04 ial kernel: Found MOXA C168 series board (CAP=0x180)
Nov 26 15:35:04 ial kernel: ttyM0/cum0 at 0x0180 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM1/cum1 at 0x0188 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM2/cum2 at 0x0190 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM3/cum3 at 0x0198 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM4/cum4 at 0x01a0 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM5/cum5 at 0x01a8 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM6/cum6 at 0x01b0 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM7/cum7 at 0x01b8 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: Found MOXA C168 series board (CAP=0x300)
Nov 26 15:35:04 ial kernel: ttyM8/cum8 at 0x0300 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM9/cum9 at 0x0308 max. baud rate up to 115200
bps.
Nov 26 15:35:04 ial kernel: ttyM10/cum10 at 0x0310 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: ttyM11/cum11 at 0x0318 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: ttyM12/cum12 at 0x0320 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: ttyM13/cum13 at 0x0328 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: ttyM14/cum14 at 0x0330 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: ttyM15/cum15 at 0x0338 max. baud rate up to
115200 bps.
Nov 26 15:35:04 ial kernel: devfs_register(ttyM): could not append to parent, err: -17
Nov 26 15:35:05 ial last message repeated 31 times
Nov 26 15:35:05 ial kernel: devfs_register(cum): could not append to parent, err: -17
Nov 26 15:35:05 ial last message repeated 31 times
I've tried to create ttyMxx/cumxx manually or with /etc/devfs/devices.d/moxa
but module still complains. And I cannot use msdiag, it says that board is null
ial:/home/lex# mxser/utility/diag/msdiag
== MOXA Smartio Family Multiport Board Status Utility(1.0) ==
Tty Device Major Number= 174.
Callout device Major Number= 175.
Board 1 : (null)
Port 1: 0x180, max. baud rate = 115200 bps.
Port 2: 0x188, max. baud rate = 115200 bps.
Port 3: 0x190, max. baud rate = 115200 bps.
Port 4: 0x198, max. baud rate = 115200 bps.
Port 5: 0x1a0, max. baud rate = 115200 bps.
Port 6: 0x1a8, max. baud rate = 115200 bps.
Port 7: 0x1b0, max. baud rate = 115200 bps.
Port 8: 0x1b8, max. baud rate = 115200 bps.
Board 2 : (null)
Port 1: 0x300, max. baud rate = 115200 bps.
Port 2: 0x308, max. baud rate = 115200 bps.
Port 3: 0x310, max. baud rate = 115200 bps.
Port 4: 0x318, max. baud rate = 115200 bps.
Port 5: 0x320, max. baud rate = 115200 bps.
Port 6: 0x328, max. baud rate = 115200 bps.
Port 7: 0x330, max. baud rate = 115200 bps.
Port 8: 0x338, max. baud rate = 115200 bps.
What am I doing wrong? Any ideas would be greatly apreciated :)
--
Best regards,
Alexey Chetroi
---
Smile... Tomorrow will be worse. (c) Murphy's law
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
