"David" == David P James <David> writes:
David> Herbert Xu was roused into action on 2002-11-23 16:11 and
David> wrote:
>> David P James <[EMAIL PROTECTED]> wrote:
David> > pre-install ide-scsi modprobe ide-cd
David>
David> The thing I don't understand is the ordering in the last
David> line, yet every example I've ever seen online is like
David> this. I'm tempted to flip it one day just to see what
David> happens.
I'm guessing it won't make any difference. See below. Besides, you did
the Right Thing (tm).
>> When ide-cd gets loaded, you should see the message
>> ide-cd: ignoring drive hdb
>> If you don't, then ide-scsi is not going to work.
David> I do see it, but it's too late... it's coming after hdb is
David> already identified. The CDRW should be identified
David> immediately after scsi1 as a device on scsi1, should it
David> not? That's how my SCSI HD is identified on scsi0 and my
David> scanner when it is attached and on for scsi2.
I'm new to initrd and a lot of other things, and Herbert can probably
tell right away what is going on. Having said that, I do have
a suggestion, and then a few questions for more knowledgeable folks:
Have you looked in the etc/modules.conf file inside your initrd image
(/boot/initrd.img-2.4.18-k7)? Does it have the changes from the
'cdrw' file you created? (BTW, if you don't already know, you look at
the file with 'mount -t cramfs -o loop initrd.img /mnt).
I am guessing (I can't tell from you dmesg snippet, but I'm confident
since there was no 'change_root' from cramfs in the snippet) that all
the stuff you described is actually happening *before* your root disk
partition is mounted. So ide-cd is being loaded during the initrd
phase, and the etc/modules file in that image does not have the
'ignore' lines and so on, so ide-cd grabbed the device. Why it did
that (if I'm on the right track) I don't know, and I'm hoping to be
educated.
Somehow, my initrd image *does* include my cdrw file changes. The
modules.conf file in the image is exactly the same as in /etc. In
addition, I noticed the the kernel-image package does not include the
initrd image. So it is being created after installation. It is also
seemingly being updated when I'm running update-modules (?). I have
not been able to figure out how all this magic happened just yet. I'm
hoping some one can tell me where to RTFM (Herbert?).
Cheers!
Shyamal
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
