On Sat, 10 Aug 1996, Tim 'The Unslept' Sailer wrote: > I recompiled the 2.0.11 to include the aic7xxx drivers and the PCI > support, swapped everything over, watched as the system booted, and > watched the errors scroll across the screen... [...deleted...] > > Does *anyone* have a clue as to what could be wrong? I'm back up on > the old system now, but would really like to see the 2940 and the > Stealth64 running...
my machine at work is a p100 with a trio64 card and an adaptec 2940W. It works fine, and has worked fine since I installed it (about 8 weeks ago). it currently has about 7 gig of scsi disk space. i remember reading in the documentation for the motherboard that with some combinations of pci cards (including some graphics & some scsi cards) that you had to set certain m/b jumpers and put the pci cards in specific slots. check your hardware manuals to see if your m/b has any similar caveats. if that fails, try it with a different graphics card (an old ISA bus card if you have one lying around)... Craig
