--- "Roberto C. Sanchez" <[EMAIL PROTECTED]> ha scritto:
> > > > i encounter the following problem when i try to mount my usb pen on
> > > > debian sarge, kernel
> 2.6.8
> > > >
> > > > ~:$ mount /pen
> > > > mount: special device /mnt/sda1 does not exist
> > > >
> > >
> > > With the drive plugged in, what is the output of 'lsusb' (you may need
> > > to install the usbutils package if you don't already have it)
> > here's the output
> >
> > ~# lsusb
> > Bus 004 Device 001: ID 0000:0000
> > Bus 003 Device 001: ID 0000:0000
> > Bus 002 Device 001: ID 0000:0000
> > Bus 001 Device 007: ID 05dc:0080 Lexar Media, Inc. Jumpdrive Secure 64MB
> > Bus 001 Device 001: ID 0000:0000
> >
> >
> > >and what
> > > is the output of 'fdisk -l /dev/sda'?
> > here's the other one
> >
> > ~# fdisk -l /dev/sda
> >
> > Disk /dev/sda: 128 MB, 128974848 bytes
> > 8 heads, 32 sectors/track, 984 cylinders
> > Units = cylinders of 256 * 512 = 131072 bytes
> >
> > Device Boot Start End Blocks Id System
> > /dev/sda1 * 1 979 125296 6 FAT16
> >
> >
>
> That is quite strange. Did you try mounting it and specifying the
> filesystem type? Something like 'mount -t vfat /dev/sda1 /pen' may yield
> better results?
> You may also want to try fat and msdos as filesystem
> types. Also, make sure that the filesystems, msdos, fat and vfat are
> compiled into the kernel or loaded as modules. You can see a complete
> list of the file systems your kernel can handle by running 'cat
> /proc/filesystems'.
here my /proc/filesystems
~# cat /proc/filesystems
nodev sysfs
nodev rootfs
nodev bdev
nodev proc
nodev sockfs
nodev futexfs
nodev tmpfs
nodev pipefs
nodev eventpollfs
nodev devpts
cramfs
nodev ramfs
nodev devfs
nodev mqueue
ext3
nodev usbfs
nodev usbdevfs
iso9660
vfat
and i add here my /etc/fstab too
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump>
<pass>
/dev/hda3 / ext3 defaults,errors=remount-ro 0
1
/dev/hda4 /home ext3 defaults 0
2
/dev/hda2 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy auto defaults,user,noauto 0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,noauto 0 0
/mnt/sda1 /pen vfat noauto,user,async,rw 0 0
maybe, should i substitute /mnt/sda1 with /dev/sda1 in /etc/fstab ??
Roberto
___________________________________
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
