Chris Bannister wrote:
On Thu, Jun 09, 2005 at 09:54:09PM -0400, Craig Russell wrote:
ok-
taking these suggestions (and I concur, grub is a lot easier) I still
have the same problem with the kernel panic. / is on /dev/hda1 swap
on /dev/hda2; grub recognizes the new kernel and it is an option on
the menu. I went back and re-verifed that ext2 and ext3 filesystems
are configured into the kernel and *NOT* as modules. I did a make
clean and a make-dpkg clean and recompiled and re-installed the new
kernel. No compilation errors, no installation errors, but still the
same can't mount root fs error.
One thing I'm confused on is the ide drivers in the 2.6 kernel. While
reading the help under ATA, etc. it states that I should be using the
scsi driver for ide drives unless I have legacy equipment (which I
don't, Vision computers x86 based, new in the last 2 weeks), but under
the scsi drivers section it asks for a specific driver and does not
list anything remotely close to what i've got.
So, I'm at a logjam.
Thanks for the help
Craig Russell
Airdigitalnetwork.com
Post /boot/grub/menu.1st
Post /etc/fstab
Here is /boot/grub/menu.lst
and /etc/fstab
One other thing that I have found in my searching is that my ide disks
might be handled by the scsi driver and I am considering trying that
(changing from /dev/hda to /dev/sda) but I am confused as to how to
verify that this behaviour applies. I'm fairly certain that this does
not apply in this case.
Thanks.
MENU.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from
0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default
entry
# is the entry saved with the command 'savedefault'.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the
default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive
editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specifiv kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
# kopt=root=/dev/hda1 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery mode) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## ## End Default Options ##
title Debian GNU/Linux, kernel 2.6.8
root (hd0,0)
kernel /boot/vmlinuz-2.6.8 ro
savedefault
boot
title Debian GNU/Linux, kernel 2.6.8 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.8 root=/dev/hda1 ro single
savedefault
boot
title Debian GNU/Linux, kernel 2.2.20-idepci
root (hd0,0)
kernel /boot/vmlinuz-2.2.20-idepci root=/dev/hda1 ro
savedefault
boot
title Debian GNU/Linux, kernel 2.2.20-idepci (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.2.20-idepci root=/dev/hda1 ro single
savedefault
boot
### END DEBIAN AUTOMAGIC KERNELS LIST
******************************************************************
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump>
<pass>
/dev/hda1 / ext2 errors=remount-ro 0 1
/dev/hda2 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy auto user,noauto 0 0
/dev/cdrom /cdrom iso9660 ro,user,noauto 0 0
adnsecure:/boot/grub#
adnsecure:/boot/grub#
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
