Hi there.
I'm trying to read the flash memory from my digital camera without success.
This is the scenario: linux-2.6.11.7 100% SCSI machine (4 discs - sda, sdb, sdc, sdd)
[EMAIL PROTECTED]:~# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.11.7 uhci_hcd S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:0c.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=040a ProdID=0570 Rev= 1.00 S: Manufacturer=Eastman Kodak Company S: Product=KODAK EasyShare DX6340 Zoom Digital Camera S: SerialNumber=KCKCJ35213065 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
[EMAIL PROTECTED]:~# mount /dev/sda4 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) /dev/sda2 on /boot type ext3 (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) usbfs on /proc/bus/usb type usbfs (rw) /dev/sdb1 on /mnt/tmp type reiserfs (rw) /dev/sdc3 on /mnt/misc type ext3 (rw) /dev/sr0 on /mnt/cdrom type iso9660 (ro,nosuid,nodev)
I've already mounted this kind of device on an IDE machine, but the same procedure isn't working here.
Thanks for your time.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
