On Friday 06 May 2005 5:04 pm, you wrote: > J.Bakshi wrote: > > Dear all, > > > > I have integrated VGA based on KM400 chipset from VIA. > > when I boot from *lnx-bbc* I can see the boot-logo. now I have configured > > 2.6.10 kernel from debian and enable framebuffer-support, > > vesa-support,vga-16-support and 16-color-logo all as *built-in features* > > but the newly build kernel can't show any logo. I have checked and logo > > graphics are there in the source. > > > > *dmesg|grep vesa* shows ---> vesafb: probe of vesafb0 failed with error > > -6 > > > > but the same command from *lnx-bbc* displays a few lines about vesafb > > information. so vesafb is there in my vga. how can I enable it in debian > > kernel 2.6.10. please note I have also manually use > > *video=vesa:ypan,inverse* when booting from build kernel but can't see > > any logo. please help to solve the problem. please cc to me. > > When booting with lnx-bbc, do a `cat /proc/cmdline' and check what it > uses for its video & vga settings.
first I have booted lnx-bbc in 640x480 mode and then vga is *vga=785* then I again tried with 800x600 mode and then vga is *vga=788* when I try with these setting with debian both the times screen became blank. dmesg|grep vesafb showing a few lines of information regarding vesafb in lnx-bbc but it is nil in case of debian kernel. I think debian kernel can't activate the vesafb of KM400 chipset. pls tell me how to solve this . please CC to me. thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
