Hi On Sat, 08 Jan 2005 00:38:53 +0100, Alexandre <[EMAIL PROTECTED]> wrote: > Hello, > > Hotplug can load module when I plug it but unlike usb hotplug, pci > hotplug can't launch some script ! juste modprobe module ! > > So I add post-install script to modules.conf (throught > /etc/modutils/network) and now when I plug at first the card it's ok ! > > Now imagine I unplug it, and plug it again... There is a little problem, > 'cause when I unplugged it, it didn't unload (modprobe -r) module, so it > doesn't load it again (and so, not launch my post-install script) :( > > so is someone knows how to unload module when card is unplug ? or knows > how hotplug can manage this ?
I modified hotplug to have remover script support for pci devices, just like the usb subsystem has. I wanted it for my own wifi card. See my wishlist bug report and patch at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=271843 It wil run the remover script when the device is unplugged. To get it to work you have to patch /etc/hotplug/pci.agent, make your own usermap file and make a removal script, just follow the template below. The remover script must have the name of the module and the usermap file has a .usermap extension. -Olaf ----------start-----/etc/hotplug/pci/ndiswrapper----- #!/bin/bash setup_remover() { [ "$REMOVER" ] || return 0 { echo "#!/bin/sh" echo "# PCI_CLASS = $PCI_CLASS" echo "# PCI_ID = $PCI_ID" echo "# PCI_SUBSYS_IS = $PCI_SUBSYS_ID" echo "# PCI_SLOT_NAME = $PCI_SLOT_NAME" echo "modprobe -r ndiswrapper" } >> $REMOVER chmod +x $REMOVER return 0 } case "$ACTION" in add) setup_remover ;; esac exit 0 ----------end---------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
