*snip* >> > >I don't know how did you ended having three entries of the "natsemi" >modules, maybe you have some program to help managing modules. Anyway, >do you really have two NIC, the "natsemi" and the "ne2k-pci"?
I am not sure how I have all of these entries either. I deleted all of the natsemi and pci-scan entries. > >Some modules listed above don't exist on a 2.6.9 kernel, like the >"usb-uhci" and "pci-scan". I didn't asked cause it should be a >dependency of the 2.6.x kernels, but did you have the >"module-init-tools" installed? > >Try to reconfigure "hotplug", with something like "dpkg-reconfigure >-plow hotplug", as it should ask about and how enabling your NIC, and >modify your /etc/network/interfaces accordingly... It did and I used the /etc/network/interfaces file as it was w/ my 2.4 kernel. I still have to load the ne2k-pci module, lsmod still shows the natsemi module, I still have to ipconfig eth0 and I have to add the route to the gateway. I have also done dpkg-reconfigure -plow hotplug and reconfigured to read all interfaces from my /etc/network/interfaces file. I don't understand how natsemi continues to be loaded as shown by lsmod ... or if that is the crux of my problem. ---------------------------------------------------------------------- Zero Crossings, Inc. -- Embedded and Digital Signal Processing Systems http://www.zerocrossings.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
