Andrea Vettorello wrote:

On Tue, 04 Jan 2005 02:45:23 +0200, Necati DEMiR <[EMAIL PROTECTED]> wrote:


Andrea Vettorello wrote:



On Mon, 03 Jan 2005 21:38:34 +0200, Necati DEMiR <[EMAIL PROTECTED]> wrote:



[...]







it is a cd-writer. i think debian knows a cd-writer is connected and
loads the module ide-scsi, but it doesn't create hdb,cdrom or sr* under
/dev/ directory.

it is not problem for me to use my cd-writer as a cd-rom. i wanna use it
as a cdrom. After solving this problem, i will try to use it as a
cd-writer, but my first aim is, to mount my cd-rom. OK? :)





First of all don't use SCSI emulation for your CD-ROM, then check if
in your /etc/udev/rules.d there's a symlink to ../cd-aliases.rules, if
not present create it, then restart udev...






i did the followings;

# ls -al /etc/udev/rules.d/
total 8
drwxr-xr-x  2 root root 4096 Dec 26 18:37 .
drwxr-xr-x  5 root root 4096 Jan  3 19:46 ..
lrwxrwxrwx  1 root root   19 Dec 26 18:37 cd-aliases.rules ->
../cd-aliases.rules
lrwxrwxrwx  1 root root   13 Dec 26 18:37 udev.rules -> ../udev.rules
lrwxrwxrwx  1 root root   12 Dec 26 18:27 z_hal-plugdev.rules ->
../hal.rules

# cd /etc/init.d

# ./udev restart
Recreating device nodes...done.

# ls /dev/
MAKEDEV hda7 ram0 shm tty19 tty35 tty51 ttyS1



[...]



ttyS41  urandom

as you see there is no hdb or cdrom still!




Have you checked if you have at least "ide-cd" module loaded? Modprobe it if not. And put a line in your /etc/modules too if not
present. The "ide-cd" depends on "ide-core" and "cdrom", so modprobing
it should load them too...



Andrea




thanks to everybody! i solved my problem.
i forgot that everything needs module.
these are the steps how i solved my problem;

#modprobe ide_cd
#echo "ide_cd">>/etc/modules

again and again thanx to everybody!

--
------------------------------------------------
Necati DEMiR
[EMAIL PROTECTED]
http://demir.web.tr
My Public Key => http://demir.web.tr/ndemir.asc
-------------------------------------------------


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]




Reply via email to