On Wed, 22 Dec 2004 01:00:26 +0100, Andreas Janssen wrote: > On a Debian system, don't edit /etc/modules.conf. Your changes will be > overwritten sooner or later. Instead edit a file in /etc/modutils, in > your case I recommend /etc/modutils/sound, which is the file alsaconf > would create. Add the following entries (if snd-intel8x0 is the correct > driver; use lspci and dmesg to get more information): > > alias sound-slot-0 snd-intel8x0 > alias snd-card-0 snd-intel8x0 > options snd-intel8x0 snd_index=0 snd_id="ICH" > > (I have no idea it the snd_id option is correct that way, I just took it > from your example above) > > After making the changes, run update-modules. If you use kernel 2.6 > instead of 2.4 (which you apparently do), edit /etc/modprobe.d/sound > instead. Make sure /etc/modprobe.conf is not present (remove it if the > file is there) > [...] > Use lsmod to check if maybe this is the problem. I think the OSS > driver name is i810_audio.
All correct so far. > and also make sure that hotplug, alsa-base and discover1 > are installed with the latest versions so that the OSS driver are not > loaded. discover1 is optional. You can also install discover (instead of discover1). Current (>= 2.0.6-1) versions of discover refrain from loading OSS modules if alsa-base (>= 1.0.7-1) has been installed. -- Thomas Hood -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
