At Wednesday, 15 December 2004, Alvin Oga <[EMAIL PROTECTED] com> wrote:
>hi ya harland > >On Wed, 15 Dec 2004, Harland Christofferson wrote: > >> development:/etc# cat raidtab >> raiddev /dev/md0 >> raid-level 1 >> nr-raid-disks 2 >> nr-spare-disks 0 >> chunk-size 4 >> persistent-superblock 1 >> device /dev/hda >> raid-disk 0 >> device /dev/hdc >> raid-disk 1 > >you need to use /dev/hda1 and /dev/hdc1 > >or whatever your corresponding partition is for your setup > >/dev/hda1 / >/dev/hda2 /tmp >/dev/hda3 /var >/dev/hda5 /usr >/dev/hda6 swap >/dev/hda7 /home > >..... gets extremely tiresome for creating /dev/md devices > for sw raid > >use google to find other raidtab examples for >config with multiple partitions > >c ya >alvin > okay ... it looks like using the whole disk was not the way to go as it looks like the only time the disks are synced is when i mdadm --stop /dev/md0; mdadm -C /dev/md0 -l1 -n2 /dev/hda /dev/hdc some of the reading i have googled leads me to believe that i have to start from scratch. the following commands aren't working out for me: mdadm -C /dev/md0 -l1 -n2 /dev/hda1 /dev/hdc1 mdadm -C /dev/md1 -l1 -n2 /dev/hda3 /dev/hdc3 mdadm -C /dev/md2 -l1 -n2 /dev/hda6 /dev/hdc6 mdadm -C /dev/md3 -l1 -n2 /dev/hda7 /dev/hdc7 mdadm -C /dev/md4 -l1 -n2 /dev/hda8 /dev/hdc8 mdadm -C /dev/md5 -l1 -n2 /dev/hda5 /dev/hdc5 ---------------------------------------------------------------------- Zero Crossings, Inc. -- Embedded and Digital Signal Processing Systems http://www.zerocrossings.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
