Hello,
Because I thought the problems might have been caused by a mistake I made with the 2.6.8 kernel, I compiled a 2.4.27 kernel and setup scsi emulation again;
Now, cdrecord can see the emulated scsi device:
[EMAIL PROTECTED]:~$ cdrecord -scanbus
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'LITE-ON ' 'LTR-48246K ' 'SKS7' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *But cd burning won't work; This error log shows nothing changed by the (huge!) move to scsi... (trying to blank the CD)
scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.25 Using libscg version 'schily-0.8'. Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identifikation : 'LTR-48246K ' Revision : 'SKS7' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R cdrecord: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.010s timeout 40s cdrecord: No disk / Wrong disk!
Can anyone tell what causes this error -- and what to do about it? It does the same when I try to blank the CD as root
debian:/home/jorishuizer# cdrecord --version
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
`dmesg` doesn't give anything special, it just ends with the scsi stuff,
SCSI subsystem driver Revision: 1.00 hdc: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-48246K Rev: SKS7 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12
I tried to search on this but I haven't been able to find solutions for this problem...
I hope you can help,
regards,
Joris
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
