Hi, I've got an MSI [EMAIL PROTECTED] Master TV Tuner. I can not get it to work with the "Configure TV Card" utility. Does anyone know if/how I can get this to work? Do I need to install something else??
It says it has this chip: Silicon Tuner & Conexant CX23883 audio/video decoder http://www.msicomputer.com/product/netpc/[EMAIL PROTECTED] Also, I live in Canada, and want to watch cable with this (NTSC). Thanks a lot for any help!! BTW, I'm using Knoppix 3.6 Hard Drive install. More info (from "lspci -vv"): 0000:01:07.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05) Subsystem: Micro-Star International Co., Ltd.: Unknown device 8606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 19 Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0000:01:07.1 Multimedia controller: Conexant: Unknown device 8801 (rev 05) Subsystem: Micro-Star International Co., Ltd.: Unknown device 8606 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 19 Region 0: Memory at e3000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
