On Sun, 03 Oct 2004, Curt Howland wrote: > On Sunday 03 October 2004 14:11, Henrique de Moraes Holschuh was heard > to say: > > Is usblp loading and finding the printer ? It needs to. > > usblp is loaded, but this is all I can find:
See the kernel logs. You need to find something like this: Oct 3 15:28:52 khazad-dum kernel: printer.c: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004 When the printer is connected/turned on. My HP DeskJet 5550 likes to disconnect and reconnect itself every time I push the on/off button (be it "on" or "off"). > # lsmod > usblp 13088 0 That's normal, unless something is actively using the device. > > Is /dev correctly configured for usblp? > > I find no usblp entry in /dev at all. > > /dev# ls -al *lp* > crwxrwxrwx 1 root lp 6, 0 Jun 13 2001 lp0 > crwxrwxrwx 1 root lp 6, 1 Jun 13 2001 lp1 > crwxrwxrwx 1 root lp 6, 2 Jun 13 2001 lp2 See that you have lp entries under /dev/usb, or look for where the USB devices end up if you are using udev (I am still using kernel 2.4, so no udev). Make sure you have usbfs on /proc/bus/usb type usbfs (rw) mounted, as well. Your printer must be listed in /proc/bus/usb/devices when it is connected to the USB bus. /sbin/MAKEDEV usb will create the usb stuff in /dev. -- "One disk to rule them all, One disk to find them. One disk to bring them all and in the darkness grind them. In the Land of Redmond where the shadows lie." -- The Silicon Valley Tarot Henrique Holschuh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
