Hello, I'm trying to get USB and hotplug working to use my digital camera (Canon S10). I believe I have the kernel configured correctly.
Here's where my USB problem might be (from syslog): Aug 26 11:23:35 localhost kernel: ehci_hcd 00:10.4: remove state 3 Aug 26 11:23:35 localhost kernel: usb.c: USB disconnect on device 00:10.4-0 address 1 Aug 26 11:23:35 localhost kernel: usb.c: USB bus 1 deregistered Aug 26 11:23:35 localhost kernel: PCI: Found IRQ 10 for device 00:10.4 Aug 26 11:23:35 localhost kernel: ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0 Aug 26 11:23:35 localhost kernel: ehci_hcd 00:10.4: irq 10, pci mem e092e000 Aug 26 11:23:35 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Aug 26 11:23:35 localhost kernel: ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 Aug 26 11:23:35 localhost kernel: hub.c: USB hub found Aug 26 11:23:35 localhost kernel: hub.c: 8 ports detected Aug 26 11:23:35 localhost pci.agent[3478]: ehci-hcd: loaded successfully Aug 26 11:23:35 localhost pci.agent[3478]: usb-uhci: blacklisted Aug 26 11:23:35 localhost pci.agent[3478]: 8139too: already loaded Aug 26 11:23:35 localhost pci.agent[3478]: snd-emu10k1: loaded successfully Aug 26 11:23:36 localhost usb.agent[3574]: Bad USB agent invocation Aug 26 11:23:38 localhost usb.agent[3505]: usbcore: blacklisted It looks like modules are being "blacklisted", whatever that means. Can any one nudge me in the right direction so I can get this fixed? Thanks in advance, -- Larry Holish <[EMAIL PROTECTED]> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
