bdee002 wrote:
I have a PS/2 optical mouse with 3 buttons the 3rd also being the roller-wheel. It is currently configured as below:
/dev/psaux imps/2 Disabled: Enable 3 button mouse Disabled: Enable scroll events from mouse wheel
The mouse works in all respects, except that it is non-responsive when the mouse is moved slowly. If I move the mouse across my deck slowly there is no response, once I start to increase the speed the cursor moves as you would except. I have played around with the sensitivity etc with no solution.
As you can Imagen, when doing delicate work with a mouse like this, it would drive anyone MAD!
Missing info:
I presume that's from your GPM config. Unless you're using GPM (I'm not) that is irrelevant.
What version of Debian?
What brand and model mouse?
What X config?
I'm using a Logitech optical USB mouse on Sarge and have no problem. Here is the relevant config:
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Buttons" "5"
# Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Some brands are likely to require a different protocol.
This is from my Progeny box:
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSectionIt works with my IBM USB keyboard with a PS/2 mouse plugged into it:-) Progeny created this setup with no USB mouse installed.
--
Cheers John
-- spambait [EMAIL PROTECTED] [EMAIL PROTECTED] Tourist pics http://portgeographe.environmentaldisasters.cds.merseine.nu/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
