Hi! I have an SB Live! 5.1 PCI soundcard. It's pci id is 1102:0002 I can access three dsp devices under my /dev. These are /dev/dsp , dsp0 and dsp1. I can test the dsp devices with: `cat /usr/bin/mc > /dev/dsp' -> Front Speakers `cat /usr/bin/mc > /dev/dsp0' -> Front Speakers(again) `cat /usr/bin/mc > /dev/dsp1' -> I can not hear anything... `cat /usr/bin/mc > /dev/dsp2' -> No such device `cat /usr/bin/mc > /dev/dsp3' -> No such device
I have four speakers. One stereo set plugged in to the green jack (Front), and one stereo set plugged in to the black jack (Rear). But I can't hear anything from the rear speakers, although they are working, cause I can change the speakers. I'm using the OSS drivers from linux kernel 2.6.7. lsmod: emu10k1 68740 2 ac97_codec 16780 1 emu10k1 From the emu-tools package (emu10k1.sf.net): emu-dspmgr -r : Routes: Pcm L:Front L Pcm L:Rear L Pcm R:Front R Pcm R:Rear R Pcm1 L:Rear L Pcm1 R:Rear R fx8:Front L fx9:Front R fx10:Rear L fx11:Rear R fx12:Analog Center fx13:Analog LFE fx15:Digital L fx15:Digital R Analog L:Rear L Analog L:ADC Rec L Analog R:Rear R Analog R:ADC Rec R CD-Spdif L:Front L CD-Spdif L:Rear L CD-Spdif R:Front R CD-Spdif R:Rear R In the kmix mixer program I can see two PCM outputs, PCM and PCM2. The PCM is only adjusting the Front speaker's volume. The PCM2 doesn't do anything... Unfortunately I can not compile the emu10k1 driver from emu10k1.sf.net, because it doesn't compile under kernel 2.6. I'm asking for help, to make the rear speakers working with this sb live card. Thanks! Daniel -- LeVA
pgp8a7pVEHegX.pgp
Description: signature
