I am trying to burn dvds with dvdrecord (sid), but I am getting very
uneven and not uniform results. I have tried lowering to -speed=4, but
judging from the counter it doesn't pay any attention to it and keep
racing. two days ago with -dummy all was beautiful, next, when I
removed the dummy option, it gave me an error in less than 20
seconds. Last night I got it to burn to the end, but gave errors while
fixating. I didn't record the session. I am using 2.6.5, with ATAPI of
course. More info about my system:
hpd:/home/tony# hdparm -itT /dev/hdb
/dev/hdb:
Model=WDC WD1600JB-00DUA0, FwRev=65.13G65, SerialNo=WD-WMACK1391110
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
Timing buffer-cache reads: 2672 MB in 2.00 seconds = 1334.87 MB/sec
Timing buffered disk reads: 132 MB in 3.02 seconds = 43.67 MB/sec
Thanks in advance to all.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
