This is really old, but it's straight up my alley, so... on Sat, Apr 03, 2004 at 07:08:39PM -0600, Christopher L. Everett ([EMAIL PROTECTED]) wrote:
> I do a lot of database work. Sometimes I must do massive batch jobs on
> my box
> such as:
>
> -- multi-gigabyte database dumps and restores
> -- tests over millions of records, searching for overlooked cases
> -- one-off queries for sales & marketing typs that join 8 or 9 tables
>
> The problem is that these things often take 10 to 30 minutes to run on
> my box. When I use the GNU time utility, I see a low PCPU number,
> typically between 15 and 25%. CPU utilization viewed through top
> remains at 35% or so, and I never go deeper than a few tens of kilobytes
> into swap, even though the 1 minute load average climbs to 2 and higher
> (I've seen peak numbers around 6).
>
> I'm using a single Seagate 40GB ATA-133 as my sole hard drive, and my
> system has an Athlon 2600 processor and 1 GB of RAM. Am I correct in
> thinking that the bottleneck lies in the HD subsystem?
Various suggestions have been made:
- SCSI over IDE.
- RAID over JBOD (just a bunch of disks), for values of JBOD >= 1.
- Filesystem choice.
- hdparm configurations.
There are a couple of things not mentioned to date, of which memory and
partitioning are two.
Background: My some-time day job involves "large scale" data analysis.
For values of large which have varied over the years, but frequently
involve multi-GiB and larger datasets, with SAS, principly on Unix
systems, but including others (legacy MS Windows, VMS, MVS, etc.).
I've done a number of system optimizations. One was a constrained
cartesian join of 100m revolving credit accounts. Runtime was reduced
from 30 hours to ~4, through a set of constraints, and an improved
algorithm.
Another tenfold reduction in runtime time was attained for a mainframe
process which made some very poor decisions about order sequencing in
performing analysis. By utilizing extant data ordering, reducing data
up front (both in rows and columns), and delaying sorts until the
working set was much smaller, wall time for the job was dropped tenfold.
More recently, changing the logic of a query against a remote database
reduce runtime from ~20 hours to five minutes.
About a year ago, I had the opportunity to benchmark a Dell desktop, 2.4
GHz CPU, 256 MiB, 7200 RPM ATA disk, against a PIII-500 512 MiB with
three SCSI drives, striped. Running identical analysis -- a straight
data read, data read+write, and a complex SAS macro ("vv") which runs a
wide range of SAS procs and complex SQL queries on the data, I found:
- Straight data read was 2x faster on the PIII-500 system.
- Read + write was > 2x faster on the PIII-500.
- The "vv" macro ran *10* times faster.
Fast disk matters. SCSI blows doors over ATA (including AFAIC SATA),
*PARTICULARLY* when simultaneous I/O is taking place. This is what a
simple file read or transfer won't tell you about, but random seeks
through data makes clear.
What the discussion to date *hasn't* made explicit is this: it's not
raw data throughput, but head contention, paritcularly head movement on
read/write activity, which slows you considerably. I'm not familiar
with any monitoring tools which report seek time, but you can often hear
it as "head chatter" when your drive gets busy. Long, linear reads are
far quieter.
Simple optimizations:
---------------------
Memory: Depending on your processing needs, if a small search set can
be held in memory while a larger dataset is sequentially searched, you
can make significant gains. Effectively, you're cutting out one whole
set of seeks, as you read the search set once at the beginning of
processing.
Partitioning: Dividing up your system into OS, user, code (or script),
permanent store, and scratch space, can result in significant
performance improvements. Especially if these uses can be isolated to
separate channels (separate controllers).
You can also take advantage of partitioning to apply appropriate
filesystems to appropriate tasks. GNU/Linux Gazette ran a recent
benchmark of common filesystems. Note that if ext2 is fastest for your
processing, you can and should by all means run ext2 on your scratch
partitions: the "security" provided by journaling is largely nil, as
all the data are transitory and can be readily rebuilt anyway.
Other System Optimizations:
---------------------------
I hope it goes without saying that networked access will kill you.
Gig-e _might_ match the performance of some slower drives, but in
general, you're talking about a thousandforld reduction in performance
for remote access. Don't do that for large data. Either bring it to
the job ahead of time, or send the job to it.
SCSI beats ATA for complex processing. Yes, there's a price premium,
but you're buying a lot, much of which is poorly understood.
RAID helps. Different RAID levels are appropriate to different tasks.
In general, you're only concerned with 0 (stripe), 1 (mirror), and 5
(parity). Remember: RAID offers performance and redundancy options,
but IS NOT A SUBSTITUTE FOR SYSTEM AND DATA BACKUPS.
RAID5 should be used for system and persistent data. While writing is
slower than JBOD due to parity data storage, it's also relatively
infrequently performed, *and* mitigated by having more (and in good RAID
systems) independently controlled heads. Reads can be far faster,
depending on data distribution over the RAID set.
For temporarary and scratch data, use stripesets (RAID0). The
performance gain is significant, paritcularly with multiple volumes, and
the risk of a data loss and downtime are largely minimal (nothing you
can't recover). Remember: you're trading process time saved with
downtime incurred. Find a balance point.
Mirroring is best saved for highly critical, seldom-changed data. A
core OS or user data mirror might be appropriate.
You may want to use LVM on your RAID volumes for additional partitioning
flexibility.
Multiple controllers help. Run your persistant data store and
scratchspace off separate RAID controllers, persistant data RAID5 (as
discussed above) and scratch RAID0. Put your OS and user state on a
third controller, possibly mirrored.
Don't forget OS and application tuning. hdparm, as mentioned, can give
significant improvements. Some software has options for selecting
blocksize, read-ahead buffering, and memory allocation. Look into your
project or vendor's docs on this.
The Really Important Part - Job Specification
---------------------------------------------
First: measure what you're doing and what you're getting. Blind
optimization (despite some fairly generally applicable empirical
recommendations above) can very often be money wasted. Performance is
most often limited by a single bottleneck. Remove or mitigate this, and
you'll see a quantuum leap in performance until the next bottleneck is
encountered. Generally, these are:
- Disk: head contention.
- Disk: throughput.
- Disk: controller capacity.
- Memory: swap.
- Network: bandwidth limitations.
- Network: protocol overhead (particularly for
compression/encryption).
- CPU: contention.
In my experience, CPU is usually the *least* critical factor in
data-intensive processing, though this rule can sometimes be broken in
advanced statistical analysis, engineering computations, or graphics
processing. The last usually benefits by data thinning as your ink
density and resolution are limited anyway.
Data design can have a large impact. In particular, indexing (or lack).
Indexes incur a cost to build or update, but often pay back manyfold on
use. I find that if I use an index more than twice, it's generally a
win (and in system development, I'll *always* use it more than once).
The most single significant factor, overall, however, is the design of
the application and global data process. Remember:
- Sorting is *expensive*. Don't do it.
- Much data has an existing collate sequence, at least across local
spans. Make use of this by pre-aggregating your data.
- Data you don't have to process is data you don't have to process.
Get rid of rows or columns not necessary for your analysis as early
as possible.
- Memory beats disk. If you (or your data engine) can make use of
hash lookups, _do it_. You'll see performance gains of 10, 100, or
1000 times over disk-based lookup.
- Pipelining wins. If you can run data from process to process,
rather than intermediating through disk, you'll save significant
I/O.
- Be ruthless in your elimination of processing steps. Don't read or
sort or write data "because that's how we've always done it".... I
don't want to think of how many mainframe SAS jobs start with a
wholly unnecessary initial data sort....
- Measure performance. Find out what steps are taking the most time
(or other limited resource) and focus on these. Code that *looks*
inefficient but doesn't use appreciable cycles isn't hurting you.
Leave it alone. And *measure both ways* -- get a before and after
for optimizations tried.
- Find out what your performance bottlenecks are. The standard tools
are 'top', 'free', 'sysstat', and related. These *don't* give a
perfect reading of what's going on on your system, and may miss
details, but they're what you've got to work with.
In general:
- Load a small search/criteria set into memory, and use it to
sequentially scan a larger dataset.
- Lose any data you don't need early on.
- When querying remote data sources, if possible, *run the query*
remotely, and just return the result set. This was the trick with
my 20 hours -> 5 minutes process. I defined a view on the remote
database, populated a small (~20k rows) table on the database
server, and queried the view for my result set (returning ~20k
records). Querying against a 40m row table, indexed.
- Avoid disk processing by streaming / piping data between processes.
- Use hashes rather than sorts or b-trees (or get your tools to use
them for you).
- Think about what you're doing.
- Do as little as possible. That's been by gag answer to "what do you
do", but from an optimization standpoint, it's the goal.
It's both science and art. Treat it that way.
Peace.
--
Karsten M. Self <[EMAIL PROTECTED]> http://kmself.home.netcom.com/
What Part of "Gestalt" don't you understand?
Save Bob Edwards! http://www.savebobedwards.com/
signature.asc
Description: Digital signature
