Hi, I have a P4P800 Asus board with the Via onboard Raid controller. I have 2 IDE ATA100 (120 G)drives plugged in. Both are masters on seperate channels. I configured the RAID bios to a RAID 1 setup. (mirroring) The raid array is setup.
Now I'm kinda lost after this part. I'm running a woody server and have used modconf to add in raid1 and ataraid. #cat /proc/mdstat Personalities : [raid1] read_ahead not set unused devices: <none> How do I get my system to see the raid device? I should have a 120 Gig drive somewhere that I can cfdisk and format shouldn't I? My system is a scsi drive on /dev/sda and I have a regular IDE drive at /dev/hda but I don't see any other ide devices. In my regular BIOS setup, I see the hda IDE device but thats it. but, in the RAID BIOS, I can see the 2 120 Gig drives, so I think they are jumpered and installed correctly.(I successfully created a Raid 1 array) Any guidence from here is greatly appreciated. Thanks!! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
