On Mon, Oct 07, 2002 at 03:06:00PM +0200, DSC@Siltec wrote: > Hi, > > I have Woody, nominally with USB support (that is, I see /dev/usb), > but I can't get it working.
I just got it working this weekend. Seeing /dev/usb in not enough. First as has been said, you need the usb-storage module. I also had to turn on USB support in my BIOS. > I tried simply "mount -t vfat /dev/usb /camera" Should this work? Here is how I did it. The usb-storage module emulates a SCSI channel, so it needs SCSI support compiled in too. Then it creates a psuedo SCSI conection. Cat /proc/scsi/scsi to see which one. Mount the appropriate SCSI dev file. The tricky part is that you have to look at all of the SCSI devices and figure out which ones will get the sd devices and which yours will be. I had something like this (I faked the camera line as its not there right now): Attached devices: Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: HP35470A Rev: 1009 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 05 Lun: 00 Vendor: UMAX Model: Astra 600S Rev: V1.6 Type: Scanner ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: TEAC Model: CD-W54E Rev: 1.1B Type: CD-ROM Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: <something> Rev: 1.0 Type: USB-Storage Since the Camera is the first disk like device, it got sda. To mount the first partition, I used: mount -t vfat /dev/sda1 /mnt/camera -- Don Reid Agilent - Imaging Electronics Div. - Corvallis, OR [EMAIL PROTECTED] 738-3726 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
