Hej
Jag har precis köpt en Zonbu (http://www.zonbu.com) och tänk köra Debian
etch på en USB HD men det går inget vidare. Får problem när den ska
boota up Här är mitt brev som jag skickat till den genrella debian
listan och jag ber om ursäkt för engelskan. Har ni något förslag på hur
jag skall gå vidare so vore jag ytterst tacksam
"I did the following (from another Debian) to the USB -HD
zcat boot.img.rz > /dev/sda
mount /dev/sda /mnt
cp initrd.gz /mnt (from the netinstall)
umount /mnt
And this time i only booted the machine with the USB HD attached and the
installer booted and run happily from the USB HD
i proceeded with the installation and selected /dev/sda as the partion
to put grub on
Reboot.... and GRUB boots but no boot entries (grub mini bash menu).
also tried the grub commands suggested but when i do root ( <tab> i only
get fd0.
Then i tried to install grub on
/dev/sda1
dosn't boot at all
making the partition reiserfs instead of ext3
Grub error 17
after doing a rescue and grub-install /dev/sda
Grub error 18
So my guess is either
a) The USB-HD isn't supported ( which seems a bit unlikely as it boots
the installer )
b) Some weird restriction exist in the hardware to boot from a USB-HD
c) Im doing some stupid mistake that I'm not realizing
I can't really come up with anything what to do next if you guys have
any more suggestions please let me know
"
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
