Kolla i debian-boot arkivet, runt den 26:e dec. 2000: > To install debian potato on an abit kt7-raid motherboard: > (well, this is what I roughly did) > > 1 Connect your disk to the first ide controller, > not to the HTP370 controller > 2 I used the debian/dists/potato/main/disks-i386/ > 2.2.20.0.1-2000-12-03/images-1.44/idepci disk set > 3 boot and install as usual > 4 download and unpack kernel/v2.2/linux-2.2.18.tar.gz > 5 download and apply patch kernel/people/hedrick/ > ide.2.2.18.1209.patch.gz > 6 make menuconfig -> Block devices: > [*] Generic PCI IDE chipset support > ... > [*] HPT366 chipset support > Don't know about theese two but they seem to work for me > [*] HPT366 Fast Interrupt support (WIP) > [*] HPT366 mode three unsupported (WIP) > (Note! this driver has no raid support, you just get the udma100 > support and two more controllers, only connect discs to hpt > controller) > and whatever else you want in the kernel > 7 make dep; make bzImage; make modules; make modules_install > 8 cp arch/.../bzImage System.map to /boot > 9 add new image to lilo.conf with root=/dev/hdexx instead of hda > 10 run lilo > 11 change hda to hde in /etc/fstab > 12 shutdown -h now > 13 poweroff > 14 move disk cable to first HPT370 connector > 15 boot
Du kan ävan titta på: http://www.linux-ide.org Hälsningar, /Karl ----------------------------------------------------------------------- Karl Hammar Aspö Data [EMAIL PROTECTED] Lilla Aspö 2340 0173 140 57 Nätverk S-742 94 Östhammar 010 270 26 67 PC/Sun datorer Sweden Linux/Unix konsulting ----------------------------------------------------------------------- From: Fredrik Andersson <[EMAIL PROTECTED]> Subject: Raid Date: Tue, 11 Sep 2001 11:58:15 -0700 > Hej, > Är det ngn som vet hur man får igång hpt370 (raid-chipset) vid > installationen, så att hårddiskarna hittas? > Har inte lyckats hitta ngn module, och enligt vad jag har läst ska > det stödjas from. Potato, men Woody-installationen lyckas iaf. inte. > > Tacksam för hjälp > > Mvh Fredrik > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
