gracias por la bienvenida...
identifique el problema, pido su ayuda para corregirlo..
el problema es que no ve la interfaz de red.... ya qe hice lo que dijiste en
interfaces, y al momento de arrancar la red me arrojo un mensaje done dice que
la
interface eth0 es desconocida.
ahora bien, el server es un HP ProLiant DL320, su tarjeta de red (segun manual)
es
Network Controller : Two NC7760 PCI Gigabit Server Adapters (embedded)
y al hacer modconf no aparece en la lista, como lo instalo???
(eso no sale en el man de interfaces ;-) )
además en la web de HP no hay driver para debian, solo para:
» Microsoft Windows Server 2003
» Microsoft Windows 2000
» Microsoft Windows NT 4.0
» Red Hat Linux 8.0
» Red Hat Linux 7.3
» Red Hat Linux 7.2
» Red Hat Enterprise Linux 2.1
» UnitedLinux 1.0
» SUSE Linux Enterprise Server 7
y de servir alguno de ellos?? como lo instalo???
adjunto dos archivos: el dmseg y lspci
a lo mejor me pueden guiar mejor con ellos...
gracias por todo
salu2
--
__________________________
Carlos Molina M.
E-mail : [EMAIL PROTECTED]
Erick Ivaan Lopez Carreon ha escrito:
> On Fri, 2003-11-07 at 08:45, Carlos Molina M wrote:
> > hola a todos...
> > quisiera hacer una consulta, luego de instalar debian 3.0 r1 (ayer)
> > me di cuenta que no tengo la red configurada...
> Bienvenido a Debian :)
>
> Para configura la red debes saber primero que hardware tienes, luego
> mirar si esta cargado el modulo, y si no esta cargado entras a modconf a
> la seccion de net e instalas el que se ajuste a tu hardware. Si todo va
> bien te dara un mensaje de que el modulo se cargo exitosamente, y ya
> deberias ver tu eth0 con ifconfig.
>
> > y no sé como hacerlo, no encuentro los directorios de configuracion
> > tampoco
> > como lo son /etc/sysconfig/network-script o /etc/sysconfig/networking
> > de donde saco ese modulo o como lo configuro....
> > es algo urgente...
>
> Para configurar tu tarjeta con ip netmask etc, esta el archivo
> /etc/network/interfaces que tiene una buena pagina de manual ;)
>
> man 5 interfaces
>
> > primera vez que trabajo con debian...
>
> Y veras que despues estaras felicitandote por usarlo :)
>
> > --
> > __________________________
> > Carlos Molina M.
> > E-mail : [EMAIL PROTECTED]
> >
> >
>
> Saludos!!
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002
(Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000047ffa000 (usable)
BIOS-e820: 0000000047ffa000 - 0000000048000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
found SMP MP-table at 000f4fd0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f9000 reserved twice.
hm, page 000fa000 reserved twice.
On node 0 totalpages: 229376
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #0 Unknown CPU [15:2] APIC version 20
I/O APIC #2 Version 17 at 0xFEC00000.
I/O APIC #3 Version 17 at 0xFEC01000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 2658.331 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 5308.41 BogoMIPS
Memory: 899796k/917504k available (1783k kernel code, 17316k reserved, 549k
data, 280k init, 0k highmem)
Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
Setting 3 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 3 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-3, 2-5, 2-7, 2-10, 3-7, 3-8, 3-9, 3-10, 3-11,
3-12, 3-13, 3-14, 3-15 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 16.
number of IO-APIC #3 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 02000000
....... : arbitration: 02
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 000 00 1 0 0 0 0 0 0 00
04 001 01 0 0 0 0 0 1 1 41
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 49
07 000 00 1 0 0 0 0 0 0 00
08 001 01 0 0 0 0 0 1 1 51
09 001 01 1 1 0 1 0 1 1 59
0a 000 00 1 0 0 0 0 0 0 00
0b 001 01 1 1 0 1 0 1 1 61
0c 001 01 0 0 0 0 0 1 1 69
0d 001 01 0 0 0 0 0 1 1 71
0e 001 01 0 0 0 0 0 1 1 79
0f 001 01 0 0 0 0 0 1 1 81
IO APIC #3......
.... register #00: 03000000
....... : physical APIC id: 03
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 03000000
....... : arbitration: 03
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 001 01 1 1 0 1 0 1 1 89
01 001 01 1 1 0 1 0 1 1 91
02 001 01 1 1 0 1 0 1 1 99
03 001 01 1 1 0 1 0 1 1 A1
04 001 01 1 1 0 1 0 1 1 A9
05 001 01 1 1 0 1 0 1 1 B1
06 001 01 1 1 0 1 0 1 1 B9
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 1:0
IRQ17 -> 1:1
IRQ18 -> 1:2
IRQ19 -> 1:3
IRQ20 -> 1:4
IRQ21 -> 1:5
IRQ22 -> 1:6
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2658.1866 MHz.
..... host bus clock speed is 132.9091 MHz.
cpu: 0, clocks: 1329091, slice: 664545
CPU0<T0:1329088,T1:664528,D:15,S:664545,C:1329091>
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I2,P0) -> 17
PCI->APIC IRQ transform: (B0,I4,P0) -> 18
PCI->APIC IRQ transform: (B0,I5,P0) -> 19
PCI->APIC IRQ transform: (B0,I6,P0) -> 20
PCI->APIC IRQ transform: (B0,I15,P0) -> 11
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
PCI: Device 00:7b not found by BIOS
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI
enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CMD649: IDE controller on PCI bus 00 dev 10
CMD649: chipset revision 2
CMD649: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2030-0x2037, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2038-0x203f, BIOS settings: hdc:pio, hdd:pio
PCI_IDE: unknown IDE controller on PCI bus 00 device 79, VID=1166, DID=0213
PCI_IDE: chipset revision 160
PCI_IDE: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0x2000-0x2007, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x2008-0x200f, BIOS settings: hdg:pio, hdh:pio
hda: Maxtor 6Y080L0, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hde: CRN-8245B, ATAPI CD/DVD-ROM drive
ide0 at 0x2010-0x2017,0x201a on irq 17
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63
hde: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: [PTBL] [9729/255/63] hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1e0ee00
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 280k freed
Adding Swap: 2097136k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf892e000, IRQ 11
usb-ohci.c: usb-00:0f.2, PCI device 1166:0221 (ServerWorks)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver keyboard
usbkbd.c: :USB HID Boot Protocol keyboard driver
00:00.0 Host bridge: ServerWorks: Unknown device 0017 (rev 32)
00:00.1 Host bridge: ServerWorks: Unknown device 0017
00:02.0 RAID bus controller: CMD Technology Inc PCI0649 (rev 02)
00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:04.0 System peripheral: Compaq Computer Corporation Advanced System
Management Controller
00:05.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a6 (rev 02)
00:06.0 Ethernet controller: BROADCOM Corporation: Unknown device 16a6 (rev 02)
00:0f.0 ISA bridge: ServerWorks: Unknown device 0203 (rev a0)
00:0f.1 IDE interface: ServerWorks: Unknown device 0213 (rev a0)
00:0f.2 USB Controller: ServerWorks: Unknown device 0221 (rev 05)
00:0f.3 Host bridge: ServerWorks: Unknown device 0227
