La línea de 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82)
A mí me cambia en (rev 91) y no creo que tenga nada que ver. La placa funciona en WXP y en Suse. Cualquier intento que hago de instalar o configurar el módulo de SiS900 caba mal. -----Mensaje original----- De: José Luis Pérez Yubero [mailto:[EMAIL PROTECTED] Enviado el: martes, 27 de mayo de 2003 8:12 Para: debian-user-spanish@lists.debian.org Asunto: Re: configuración de red ----- Original Message ----- From: "Ricardo - Eureka!" <[EMAIL PROTECTED]> To: "Lista Español Debian" <debian-user-spanish@lists.debian.org> Sent: Monday, May 26, 2003 4:16 PM Subject: Re: configuración de red > On Mon, May 26, 2003 at 02:22:41AM +0200, [EMAIL PROTECTED] wrote: > > > /lib/modules/2.2.20-idepci/net/sis900.o: insmod sis900 failed > > > > Falló la instalación. > mandanos la salida de lspci, dmesg y lsmod. > > -- > Ricardo A.Frydman > Analista de Sistemas de Computación http://www.eureka-linux.com.ar > > > Hola a todos, A mi me pasa el mismo problema, cuando intento cargar el módulo de sis900 me dice que falla. Si intento configurarlo mediante el "modconf" dice que el dispositivo está "busy". Les adjunto las salidas de lspci, dsmesg y lsmod por si ven algo en ellos. Muchas gracias por adelantado. ---------------------------------LSPCI---------------------------- Goolum:/home/jose# lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 31) 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet (rev 82) 00:01.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:01.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator (rev 02) 00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev a0) 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP 00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus Controller (rev 02) 00:0a.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 8017 (rev 02) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS630 GUI Accelerator+3D (rev 31) ----------------------------------LSMOD------------------------------ Module Size Used by ds 6400 1 i82365 22672 1 pcmcia_core 45824 0 [ds i82365] af_packet 6152 0 (unused) unix 11352 22 (autoclean) ------------------------DMESG------------------------------------------- --- Linux version 2.2.20 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Sat Apr 20 11:45:28 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0009f000 @ 00000000 (usable) BIOS-e820: 0def0000 @ 00100000 (usable) Detected 863932 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1723.59 BogoMIPS Memory: 224356k/229312k available (1756k kernel code, 412k reserved, 2636k data, 152k init) Dentry hash table entries: 32768 (order 6, 256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 256K L2 cache (8 way) CPU: L2 Cache: 256K CPU: Intel Pentium III (Coppermine) stepping 06 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xeb2e0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting kswapd v 1.5 Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A ttyS44 at 0x3220 (irq = 3) is a 8250 ttyS45 at 0x3228 (irq = 3) is a 8250 pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 SIS5513: IDE controller on PCI bus 00 dev 01 SIS5513: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-10, ATA DISK drive hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: HITACHI_DK23BA-10, 9590MB w/512kB Cache, CHS=1222/255/63 hdc: ATAPI 24X DVD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: <fdomain> Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present --> Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23, 2000) aec671x_detect: 3ware Storage Controller device driver for Linux v1.02.00.008. 3w-xxxx: tw_findcards(): No cards found. scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 257000k swap-space (priority -1) Linux PCMCIA Card Services 3.1.33 kernel build: 2.2.20 #1 Sat Apr 20 11:45:28 EST 2002 options: [pci] [cardbus] [apm] PCI routing table version 1.0 at 0xfe840 Intel ISA/PCI/CardBus PCIC probe: TI 4410 rev 02 PCI-to-CardBus at slot 00:0a, mem 0x68000000 host opts [0]: [ring] [serial pci & irq] [no pci irq] [lat 168/176] [bus 32/34] ISA irqs (scanned) = 3,4,7,9 polling interval = 1000 ms Gracias de nuevo.! --------------------------------------------------------------------- This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message by mistake, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. Este mensaje puede contener información confidencial o privilegiada. Si Vd. no es el destinatario ni está autorizado por el mismo para recibir este mensaje, Vd. no debe usar, copiar, revelar ni tomar ninguna medida basada en este mensaje o en la información que contiene. Si Vd. ha recibido este mensaje por error, notifíquelo de forma inmediata al remitente por correo electrónico y borre el mensaje. Gracias por su cooperación. --------------------------------------------------------------------- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
