Buen día,
hace unos días actualicé mi debian testing y me di con que mi placa de
red no funciona... y probablemente hace mucho no funciona porque venía
manejándome exclusivamente por wifi
según lspci -v -k:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI
Express Fast Ethernet controller (rev 05)
Subsystem: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast
Ethernet controller
Flags: fast devsel, IRQ 17
I/O ports at d000 [size=256]
Memory at d0604000 (64-bit, prefetchable) [size=4K]
Memory at d0600000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
Kernel modules: r8169
según lsmod tengo cargado el módulo:
lsmod |grep 8169
r8169 98304 0
libphy 94208 2 r8169,realtek
pero ifconfig -a no aparece nada cableado:
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 253 bytes 36319 (35.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 253 bytes 36319 (35.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 10.0.219.22 netmask 255.255.255.255 destination 10.0.219.21
inet6 fe80::5ca3:a319:866d:ed6e prefixlen 64 scopeid 0x20<link>
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100
(UNSPEC)
RX packets 16269 bytes 6831208 (6.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13743 bytes 836991 (817.3 KiB)
TX errors 0 dropped 4 overruns 0 carrier 0 collisions 0
wlp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.21.234.143 netmask 255.255.0.0 broadcast 172.21.255.255
inet6 fe80::1acf:5eff:fe6a:ac3c prefixlen 64 scopeid 0x20<link>
ether 18:cf:5e:6a:ac:3c txqueuelen 1000 (Ethernet)
RX packets 106881 bytes 73644461 (70.2 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 85649 bytes 14929711 (14.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
no se que se me está pasando por alto o que estoy haciendo mal al buscar ayuda
en google?
