Gracias por responder... Pudiera ser cierto, mi sda1 esta tocado, me lo canta siempre Wheezy y Jessie al iniciar el sistema.
Pero va ha ser que no es hardware, he comprobado con Wheezy y todo perfecto... Wheezy incorpora Gimp 2.8.2... no me cuelga nunca. Jessie incorpora Gimp 2.8.10 y al igual que Mint 17.02 ambas cuelgan... Es problema de software, seguro. Salud! Jac. On Tue, 13 Oct 2015 01:13:52 +0200 Jose Ab bA <jacsen...@gmail.com> wrote: > Buenas! > > A ver si me podeis echar un cable: > > Tengo instalado Jessie+Mate y Gimp 2.8, cuando manipulo alguna imagen, por > algun motivo se me satura la maquina (se pone hacer operaciones en el disco > como loca... es como si se hubiera quedado sin ram (tiene 4gb) y estuviese > utilizando las swaps (hay 2)). > > Despues de un buen rato, o se me cierra la sesion, o muere Gimp con todo el > trabajo que habia hecho. > > Intento indagar en el momento, pero el sistema queda tan saturado que no > puedo ni cambiarme a ninguno de los tty... Y para cuando puedo hacer algo > ya es tarde. > > Os pego el lspci de la maquina, por si os sirve de algo: > > 00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11) > 00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port > 1 (rev 11) > 00:08.0 System peripheral: Intel Corporation Core Processor System > Management Registers (rev 11) > 00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and > Scratchpad Registers (rev 11) > 00:08.2 System peripheral: Intel Corporation Core Processor System Control > and Status Registers (rev 11) > 00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous > Registers (rev 11) > 00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev > 11) > 00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and > Protocol Registers (rev 11) > 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 > Enhanced Host Controller (rev 06) > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High > Definition Audio (rev 06) > 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 1 (rev 06) > 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 4 (rev 06) > 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 5 (rev 06) > 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 6 (rev 06) > 00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 7 (rev 06) > 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 > Enhanced Host Controller (rev 06) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) > 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface > Controller (rev 06) > 00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 > port SATA IDE Controller (rev 06) > 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus > Controller (rev 06) > 00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 > port SATA IDE Controller (rev 06) > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] > Juniper XT [Radeon HD 5770] > 01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI > Audio [Radeon HD 5700 Series] > 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller > (rev 03) > 04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE > Controller (rev 03) > 04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller > (rev 03) > 05:00.0 IDE interface: Marvell Technology Group Ltd. Device 91a3 (rev 11) > 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) > 07:03.0 IDE interface: Integrated Technology Express, Inc. IT8213 IDE > Controller > 07:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 > Controller (PHY/Link) > 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath > Architecture Generic Non-Core Registers (rev 04) > 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath > Architecture System Address Decoder (rev 04) > 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04) > 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev > 04) > 3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller (rev 04) > 3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Target Address Decoder (rev 04) > 3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Test Registers (rev 04) > 3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 0 Control Registers (rev 04) > 3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 0 Address Registers (rev 04) > 3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 0 Rank Registers (rev 04) > 3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 0 Thermal Control Registers (rev 04) > 3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 1 Control Registers (rev 04) > 3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 1 Address Registers (rev 04) > 3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 1 Rank Registers (rev 04) > 3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory > Controller Channel 1 Thermal Control Registers (rev 04) > > Por cierto, este lspci es desde Mint 17.02... En esta pasa lo mismo que en > Jessie. > > No os lleveis las manos a la cabeza, no es que me haga un lio con una > distro y con otra, es solo que hay 4 S.O. disintos intalados a lo largo de > los 3 Hds. que tiene el sistema (sda1: Jessie, sda4: Wheezy, sdb1: Mint y > sdb4: Comodore, que no uso...) > > Si no recuerdo mal, en Wheezy no pasaba esto, aunque hace algun tiempo que > no la arranco... > > Alguna idea? > > Salud! > > Jac. Aveces es problema del disco-duro que te avisa que no va mas. -- Servicios:. http://mamalibre.com.ar/plus MamaLibre, Casa en Lincoln, Ituzaingo 1085 CP6070, Buenos Aires, Argentina *Attachment: pgpJcwZ3oDZcx.pgp <https://lists.debian.org/debian-user-spanish/2015/10/pgpJcwZ3oDZcx.pgp>* *Description:* PGP signature
