Hola! Bueno mi problema es el siguiente, tengo el kernel 2.4.12.4 y no
hay formaque me deje montar mi reproductor de mp3 a continuación pego mi
configuración del kernel:
ATA/ATAPI/MFM/RLL support --->
<*> SCSI emulation support
SCSI device support --->
--- SCSI device
support
[*] legacy /proc/scsi/
support
--- SCSI support type (disk, tape,
CD-ROM)
<*> SCSI disk
support
<*> SCSI generic support
y ahora.. paso lo que me tira el syslog cuando enchufo el mp3:
Aug 21 15:21:45 ZeDranT kernel: usb 4-2: new high speed USB device using
ehci_hcd and address 5
Aug 21 15:21:45 ZeDranT kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Aug 21 15:21:45 ZeDranT kernel: usb-storage: device found at 5
Aug 21 15:21:45 ZeDranT kernel: usb-storage: waiting for device to
settle before scanning
Aug 21 15:21:50 ZeDranT kernel: Vendor: SanDisk Model: SDMX1 MP3
Player Rev: 1.00
Aug 21 15:21:50 ZeDranT kernel: Type:
Direct-Access ANSI SCSI revision: 00
Aug 21 15:21:51 ZeDranT kernel: SCSI device sda: 497664 512-byte hdwr
sectors (255 MB)
Aug 21 15:21:51 ZeDranT kernel: sda: Write Protect is off
Aug 21 15:21:51 ZeDranT kernel: sda: Mode Sense: 23 00 00 00
Aug 21 15:21:51 ZeDranT kernel: sda: assuming drive cache: write through
Aug 21 15:21:51 ZeDranT kernel: SCSI device sda: 497664 512-byte hdwr
sectors (255 MB)
Aug 21 15:21:51 ZeDranT kernel: sda: Write Protect is off
Aug 21 15:21:51 ZeDranT kernel: sda: Mode Sense: 23 00 00 00
Aug 21 15:21:51 ZeDranT kernel: sda: assuming drive cache: write through
Aug 21 15:21:51 ZeDranT kernel: sda: sda1
Aug 21 15:21:51 ZeDranT kernel: Attached scsi removable disk sda at
scsi3, channel 0, id 0, lun 0
Aug 21 15:21:51 ZeDranT kernel: Attached scsi generic sg0 at scsi3,
channel 0, id 0, lun 0, type 0
Aug 21 15:21:51 ZeDranT kernel: usb-storage: device scan complete
Aug 21 15:21:51 ZeDranT scsi.agent[4957]: sd_mod: can't be loaded
(for disk)
y cuando quiero montar /dev/sda o /dev/sda1 no hay forma me tira errores
de todo tipo.
Bueno agradeceria alguna soga porque no entiendo porque no anda
aparentemente esta todo ok y bueno en fin, gracias por su ayuda.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
