El mié, 12-01-2005 a las 18:53 +0100, Txente escribió: > Hola, > Mi Debian me da este error horrible > > "Losing too many ticks! > TSC cannot be used as a timesource. > Possible reasons for this are: > You're running with Speedstep, > You don't have DMA enabled for your hard disk (see hdparm), > Incorrect TSC synchronization on an SMP system (see dmesg). > Falling back to a sane timesource now" > > La maquina culpable es un P-IV 2.4 con 512MB, tres discos duros IDE > Maxtor de 160GB (segun la bios UDMA Mode 6), y un lector de CD LG 52x. > > El nucleo es la version 2.6.8 compilada para P-IV. y me da ese error > > Sus "tripas" son > > 0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx > (rev 02) > 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual > PCI-to-PCI bridge (AGP) > 0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL > Media IO] (rev 04) > 0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 > 0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] > 0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems > [SiS] Sound Controller (rev a0) > 0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > Controller (rev 0f) > 0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > Controller (rev 0f) > 0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 > Controller (rev 0f) > 0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 > Controller > 0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] > SiS900 PCI Fast Ethernet (rev 91) > 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 > [GeForce4 MX 440 AGP 8x] (rev a2) > > > He visto que este problema con chipsets intel se solucionaba > reconfigurando el kernel y activando CONFIG_BLK_DEV_PIIX=y > > Yo lo he hecho y me ignora totalmente (vamos se empeña en darme dolores > de cabeza) > > ¿Alguna idea? Cualquier sugerencia es bienvenida :-) > > Gracias, > Txente > En la ayuda del kernel en la sección ACPI - Power Management Timer Support:
CONFIG_X86_PM_TIMER: The Power Management Timer is available on all ACPI-capable, in most cases even if ACPI is unusable or blacklisted. This timing source is not affected by powermanagement features like aggressive processor idling, throttling, frequency and/or voltage scaling, unlike the commonly used Time Stamp Counter (TSC) timing source. So, if you see messages like 'Losing too many ticks!' in the kernel logs, and/or you are using this on a notebook which does not yet have an HPET, you should say "Y" here. Me sonaba de haberlo visto alguna vez y grep hace el resto. Comprueba que tengas activado el Power Management Timer Support -- Dani Chaves <[EMAIL PROTECTED]> DADA
signature.asc
Description: Esta parte del mensaje =?ISO-8859-1?Q?est=E1?= firmada digitalmente
