Pessoal, gostaria de saber se alguém sabe habilitar na mylex o cache de leitura e escrita no linux.
Outra pergunta é pq uma HD Utra Wide SCSI de 160MB quando dou um cat /proc/rd/c0/current_status me mostra somente em Wide Synchronous 40MB/sec? Sendo que eu tenho outros HD's mostrando 160MB/sec, será que está baleada o hd? DAC960#0: Firmware Version: 6.00-01, Channels: 1, Memory Size: 32MB DAC960#0: PCI Bus: 3, Device: 4, Function: 1, I/O Address: Unassigned DAC960#0: PCI Address: 0xFC000000 mapped at 0xE0000000, IRQ Channel: 11 DAC960#0: Controller Queue Depth: 512, Maximum Blocks per Command: 2048 DAC960#0: Driver Queue Depth: 511, Scatter/Gather Limit: 128 of 257 Segments DAC960#0: Physical Devices: DAC960#0: 0:0 Vendor: IBM Model: DDYS-T36950M Revision: S96H DAC960#0: Wide Synchronous at 40 MB/sec DAC960#0: Serial Number: 4FY30002 DAC960#0: Disk Status: Online, 71651328 blocks DAC960#0: Errors - Parity: 0, Soft: 0, Hard: 0, Misc: 1 DAC960#0: Timeouts: 0, Retries: 0, Aborts: 0, Predicted: 0 Obrigado Marcos
