Linux version 2.2.19 (herbert@gondolin) (gcc version 2.7.2.3) #1 Sat Jun 9 13:04:06 EST 2001 BIOS-provided physical RAM map: BIOS-e820: 000a0000 @ 00000000 (usable) BIOS-e820: 03efc000 @ 00100000 (usable) Detected 451030 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 897.84 BogoMIPS Memory: 62216k/65520k available (1744k kernel code, 408k reserved, 996k data, 156k init) Dentry hash table entries: 8192 (order 4, 64k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 512K L2 cache (4 way) CPU: L2 Cache: 512K CPU: Intel Pentium III (Katmai) stepping 03 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) PCI: PCI BIOS revision 2.10 entry at 0xf08b0 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Enabling I/O for device 00:58 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS03 at 0x02e8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA hda: QUANTUM FIREBALL CX10.2A, ATA DISK drive hdb: ST32122A, ATA DISK drive hdd: ATAPI CDROM, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: QUANTUM FIREBALL CX10.2A, 9787MB w/418kB Cache, CHS=1247/255/63 hdb: ST32122A, 2014MB w/128kB Cache, CHS=1023/64/63 hdd: ATAPI 50X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present --> Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23, 2000) aec671x_detect: 3w-xxxx: tw_findcards(): No cards found. scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hda3 < hda5 > hdb: hdb1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 156k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 136512k swap-space (priority -1) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin and others eepro100.c: VA Linux custom, Dragan Stancevic 2000/11/15 eth0: Intel PCI EtherExpress Pro100 82557, 00:90:27:14:5A:99, IRQ 10. Receiver lock-up bug exists -- enabling work-around. Board assembly 701738-003, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x24c9f043). Receiver lock-up workaround activated. 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) 00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) 00:0a.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05) 00:0b.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06) 00:0c.0 VGA compatible controller: Trident Microsystems TGUI 9660/968x/968x (rev d3) 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02e8-02ef : serial(set) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) d800-d807 : ide0 d808-d80f : ide1 c401e000-c401e01f : Intel Speedo3 Ethernet CPU0 0: 140628 XT-PIC timer 1: 891 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 10: 698 XT-PIC eth0 13: 1 XT-PIC fpu 14: 43064 XT-PIC ide0 15: 8 XT-PIC ide1 NMI: 0 SEGUNDA PARTE Probe Basico No comando depmod -a nao aconteceu nada Using /lib/modules/2.2.19/misc/es1371.o