2009/5/20 Fabricio Cannini <fcann...@gmail.com>: > On Wednesday 20 May 2009 16:16:53 Fred Maranhão wrote: >> Gente, >> >> Quando eu ligo um monitor na saída VGA do meu laptop não aparece nada. >> Já alternei o modo de saída e nada. O que pode ser? Tem algum comando >> que eu posso usar para forçar a imagem a sair no monitor externo? >> >> Fred > > Pergunta mais básica, impossível: > Qual é a marca/modelo da tua placa de vídeo ?
$ lspci | grep -i vga 05:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1) > A nvidia do meu note, por exemplo, não funciona com o driver livre, o 'nv' , > só com o proprietário. $ grep -i nv /var/log/Xorg.0.log (--) PCI: (0:10:3) nVidia Corporation MCP51 PMU rev 163, Mem @ 0xc0040000/18 (--) PCI:*(5:0:0) nVidia Corporation G72M [GeForce Go 7400] rev 161, Mem @ 0xc2000000/24, 0xd0000000/28, 0xc1000000/24 (II) Module glx: vendor="NVIDIA Corporation" (II) NVIDIA GLX Module 96.43.07 Wed Jul 2 12:30:36 PDT 2008 (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" (II) NVIDIA dlloader X Driver 96.43.07 Wed Jul 2 12:18:58 PDT 2008 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (WW) NVIDIA: No matching Device section for instance (BusID PCI:0:10:3) found (--) Chipset NVIDIA GPU found (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce Go 7400 at PCI:5:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.72.22.58.21 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce Go 7400 at PCI:5:0:0: (--) NVIDIA(0): CPT (DFP-0) (--) NVIDIA(0): CPT (DFP-0): 330.0 MHz maximum pixel clock (--) NVIDIA(0): CPT (DFP-0): Internal Dual Link LVDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (WW) NVIDIA(0): (WW) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (WW) NVIDIA(0): will be used as the requested mode. (WW) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1280 x 800 (--) NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (II) NVIDIA(0): Initialized GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL acho que estou usando o proprietário, correto? É isto que posso concluir da linha (II) LoadModule: "nvidia" acima? -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
