2009/4/8 Rodolfo <[email protected]>
>
>
> ---------- Forwarded message ----------
> From: Rodolfo <[email protected]>
> Date: 2009/4/8
> Subject: Re: erro no cdrecord
> To: tombs <[email protected]>
>
>
> ok...então segundo seu fstab....vc tem 2 drive de CD/DVD certo?....vc tem
> isso mesmo?
>
> se sim.....poste aqui as especificações de cada
>
> por exemplo: SONY DVDR ....... e informe qual deles tem capacidade de
> gravação....e tal...
>
> VC NAO ME INFORMOU SE JA CONSEGUIU GRAVAR ALGUMA COISA COM ESSE COMANDO....
>
> aguardando resposta da pergunta acima tb
>
>
> 2009/4/8 tombs <[email protected]>
>
>>
>>
>> 2009/4/8 Rodolfo <[email protected]>
>>
>> 1 - vc ja gravou algum cd ou dvd antes com esse comando?.........porque na
>>> mensagem tb diz que vc não especificou nenhum modo de escrita...."TAO, SAO,
>>> etc......", acrescenta mais essa informação pra ver se corrigi o erro.....
>>>
>>> 2 - e outra.....posta o teu fstab pra ver.......
>>>
>>> falou!
>>>
>>> :-)
>>>
>>> 2009/4/8 tombs <[email protected]>
>>>
>>> Estou tentando gravar um cd via linha de comando, e estou obtendo o
>>>> seguinte problema/erro:
>>>>
>>>> to...@machine:~$ cdrecord -v -fs=16M speed=48 dev=/dev/hdc -data
>>>> debian-testing-i386-netinst.iso
>>>> wodim: No write mode specified.
>>>> wodim: Asuming -tao mode.
>>>> wodim: Future versions of wodim may have different drive dependent
>>>> defaults.
>>>> TOC Type: 1 = CD-ROM
>>>> wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
>>>> limits.scsidev: '/dev/hdc'
>>>> devname: '/dev/hdc'
>>>> scsibus: -2 target: -2 lun: -2
>>>> Linux sg driver version: 3.5.27
>>>> Wodim version: 1.1.9
>>>> SCSI buffer size: 64512
>>>> Device type : Removable CD-ROM
>>>> Version : 0
>>>> Response Format: 2
>>>> Capabilities :
>>>> Vendor_info : 'PIONEER '
>>>> Identification : 'DVD-RW DVR-110D'
>>>> Revision : '1.17'
>>>> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>>>> wodim: Cannot load media with this drive!
>>>> wodim: Try to load media by hand.
>>>> Current: 0x0000 (Reserved/Unknown)
>>>> Profile: 0x002B (DVD+R/DL)
>>>> Profile: 0x001B (DVD+R)
>>>> Profile: 0x001A (DVD+RW)
>>>> Profile: 0x0016 (DVD-R/DL layer jump recording)
>>>> Profile: 0x0015 (DVD-R/DL sequential recording)
>>>> Profile: 0x0014 (DVD-RW sequential recording)
>>>> Profile: 0x0013 (DVD-RW restricted overwrite)
>>>> Profile: 0x0011 (DVD-R sequential recording)
>>>> Profile: 0x0010 (DVD-ROM)
>>>> Profile: 0x000A (CD-RW)
>>>> Profile: 0x0009 (CD-R)
>>>> Profile: 0x0008 (CD-ROM)
>>>> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>>>> Driver flags : MMC-3 SWABAUDIO BURNFREE
>>>> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
>>>> RAW/R96R
>>>> Drive buf size : 1267712 = 1238 KB
>>>> Beginning DMA speed test. Set CDR_NODMATEST environment variable if
>>>> device
>>>> communication breaks or freezes immediately after that.
>>>> FIFO size : 16777216 = 16384 KB
>>>> Track 01: data 152 MB
>>>> Total size: 175 MB (17:23.94) = 78296 sectors
>>>> Lout start: 175 MB (17:25/71) = 78296 sectors
>>>> wodim: Cannot load media with this drive!
>>>> wodim: Try to load media by hand.
>>>> wodim: Cannot load media.
>>>> to...@machine:~$
>>>>
>>>> Dei uma olhada no google sobre esse problema de Cannot raise
>>>> RLIMIT_MEMLOCK limits.scsidev: '/dev/hdc'
>>>> e me parece que tem algo a ver com suid, e que teria que rodar um
>>>> dpkg-statoverride, como consta essa thread:
>>>> http://www.nabble.com/CD-burning-stopped-working-td16749293.html
>>>> Mas desconfio não estar acertando nas opções.
>>>> machine:~# dpkg-statoverride --add --admindir /usr/bin/wodim
>>>> /usr/sbin/dpkg-statoverride: cannot open statoverride: Not a directory
>>>>
>>>> Alguem poderia me dar uma ajuda por favor?
>>>>
>>>> Thanx
>>>>
>>>>
>>>>
>>> Rodolfo...valeu a ajuda
>>
>> Eu nao especifiquei nenhum modo de escrita, mas o cdrecord tem essa
>> passagem:
>> wodim: No write mode specified.
>> wodim: Asuming -tao mode.
>>
>> fstab:
>>
>> /dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0
>> /dev/hdc /media/cdrom1 udf,iso9660 user,noauto 0 0
>>
>
>
> Rodolfo...
Nao, nunca gravei nada nessa maquina. Estou tentando gravar pq na minha
maquina principal, ta dando pau. Entao estou tentando numa outra.
cdrecord -scanbus
scsibus1000:
1000,0,0 100000) *
1000,1,0 100001) *
1000,2,0 100002) 'PIONEER ' 'DVD-RW DVR-110D' '1.17' Removable
CD-ROM
1000,3,0 100003) 'HL-DT-ST' 'RW/DVD GCC-4480B' '1.00' Removable
CD-ROM
1000,4,0 100004) *
1000,5,0 100005) *
1000,6,0 100006) *
1000,7,0 100007) *
O Pioneer é um gravador, e o HL-DT-ST(Samsung) é um combo.
O jumper esta com o Pioneer como master.
