Imagino pelo tempo que vc ja deve ter encontrado a solução... pelo seu dmesg o isapnp ta achando sua placa:
[ 3.487738] isapnp: Scanning for PnP cards... [ 3.583833] pnp 01:01.03: CMI8330 quirk - forced possible IRQs to 5, 7, 10 and DMA channels to 1, 3 [ 3.584039] 01:01: card 'CMI8330/C3D Audio Adapter' [ 3.584072] isapnp: 1 Plug & Play card detected total ... [ 23.435116] sb: Init: Starting Probe... [ 23.437766] OSS SndBlstr 01:01.03: activated [ 23.437801] sb: PnP: Found Card Named = "CMI8330/C3D Audio Adapter", Card PnP id = CMI0001, Device PnP id = @x...@0001 [ 23.437822] sb: PnP: Detected at: io=0x220, irq=5, dma=1, dma16=5 [ 23.437950] SB 4.13 detected OK (220) [ 23.442279] sb: Init: Done ... [ 24.303648] cmi8330: PnP detection failed #pnpdump -c > /etc/isapnp.conf #isapnp /etc/isapnp.conf so confere se tem o modulo pra essa placa ... 03:/home/eguedes# modprobe -c | egrep -i cmi8330 alias pnp:d...@x@0001* snd_cmi8330 alias pnp:d@@@0001* snd_cmi8330 03:/home/eguedes# cat /etc/issue Debian GNU/Linux squeeze/sid \n \l 2009/3/28 Victor Henrique Gonçalves <v...@ibest.com.br> > Boa tarde, > > Eu estou tendo problemas para instalar a CMI 8330 C3D. Segue abaixo o > resultado do comando dmesg. Por favor, me ajudem. > > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.26-1-486 (Debian 2.6.26-13lenny2) ( > da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian > 4.1.2-25)) #1 Fri Mar 13 17:25:45 UTC 2009 > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 0000000010000000 (usable) > [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > [ 0.000000] 256MB LOWMEM available. > [ 0.000000] Entering add_active_range(0, 0, 65536) 0 entries of 256 used > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0 -> 4096 > [ 0.000000] Normal 4096 -> 65536 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[1] active PFN ranges > [ 0.000000] 0: 0 -> 65536 > [ 0.000000] On node 0 totalpages: 65536 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 > [ 0.000000] Normal zone: 480 pages used for memmap > [ 0.000000] Normal zone: 60960 pages, LIFO batch:15 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] DMI not present or invalid. > [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found > [20080321] > [ 0.000000] Allocating PCI resources starting at 20000000 (gap: > 10000000:efff0000) > [ 0.000000] PM: Registered nosave memory: 000000000009f000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000f0000 > [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - > 0000000000100000 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 65024 > [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet > [ 0.000000] No local APIC present or hardware disabled > [ 0.000000] mapped APIC to ffffb000 (01202000) > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) > [ 0.000000] Detected 400.927 MHz processor. > [ 0.004000] Console: colour VGA+ 80x25 > [ 0.004000] console [tty0] enabled > [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 > bytes) > [ 0.004000] Memory: 249112k/262144k available (1694k kernel code, 12464k > reserved, 745k data, 320k init, 0k highmem) > [ 0.004000] virtual kernel memory layout: > [ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB) > [ 0.004000] vmalloc : 0xd0800000 - 0xfffb1000 ( 759 MB) > [ 0.004000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) > [ 0.004000] .init : 0xc0364000 - 0xc03b4000 ( 320 kB) > [ 0.004000] .data : 0xc02a7b33 - 0xc0362000 ( 745 kB) > [ 0.004000] .text : 0xc0100000 - 0xc02a7b33 (1694 kB) > [ 0.004000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.084616] Calibrating delay using timer specific routine.. 803.25 > BogoMIPS (lpj=1606513) > [ 0.084847] Security Framework initialized > [ 0.084885] SELinux: Disabled at boot. > [ 0.084906] Capability LSM initialized > [ 0.084978] Mount-cache hash table entries: 512 > [ 0.085802] Initializing cgroup subsys ns > [ 0.085826] Initializing cgroup subsys cpuacct > [ 0.085843] Initializing cgroup subsys devices > [ 0.086174] Enabling new style K6 write allocation for 256 Mb > [ 0.086198] CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 > bytes/line) > [ 0.086214] CPU: L2 Cache: 256K (32 bytes/line) > [ 0.086268] CPU: AMD-K6(tm) 3D+ Processor stepping 01 > [ 0.086305] Checking 'hlt' instruction... OK. > [ 0.105864] Freeing SMP alternatives: 0k freed > [ 0.105878] ACPI: Core revision 20080321 > [ 0.106064] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While > loading namespace from ACPI tables [20080321] > [ 0.106090] ACPI: Unable to load the System Description Tables > [ 0.107405] net_namespace: 652 bytes > [ 0.107436] Booting paravirtualized kernel on bare hardware > [ 0.108006] NET: Registered protocol family 16 > [ 0.109159] EISA bus registered > [ 0.141040] PCI: PCI BIOS revision 2.10 entry at 0xfb000, last bus=1 > [ 0.141054] PCI: Using configuration type 1 for base access > [ 0.141071] Setting up standard PCI resources > [ 0.150126] ACPI: Interpreter disabled. > [ 0.150150] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.150288] pnp: PnP ACPI: disabled > [ 0.150303] PnPBIOS: Scanning system for PnP BIOS support... > [ 0.150835] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbc10 > [ 0.150858] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbc38, dseg > 0xf0000 > [ 0.155177] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by > driver > [ 0.156411] PCI: Probing PCI hardware > [ 0.156429] PCI: Probing PCI hardware (bus 00) > [ 0.156959] pci 0000:00:07.3: quirk: region 5000-50ff claimed by > vt82c586 ACPI > [ 0.159555] PCI: Using IRQ router VIA [1106/0586] at 0000:00:07.0 > [ 0.160512] system 00:07: iomem range 0x0-0x9ffff could not be reserved > [ 0.160535] system 00:07: iomem range 0xfffe0000-0xffffffff could not be > reserved > [ 0.160553] system 00:07: iomem range 0x100000-0xfffffff could not be > reserved > [ 0.160591] system 00:08: iomem range 0xf0000-0xf3fff could not be > reserved > [ 0.160608] system 00:08: iomem range 0xf4000-0xf7fff could not be > reserved > [ 0.160625] system 00:08: iomem range 0xf8000-0xfbfff could not be > reserved > [ 0.160642] system 00:08: iomem range 0xfc000-0xfffff could not be > reserved > [ 0.160675] system 00:0b: ioport range 0x208-0x20f has been reserved > [ 0.162390] PCI: Bridge: 0000:00:01.0 > [ 0.162403] IO window: d000-dfff > [ 0.162417] MEM window: 0xe4000000-0xe5ffffff > [ 0.162431] PREFETCH window: 0x0000000020000000-0x00000000200fffff > [ 0.162462] PCI: Setting latency timer of device 0000:00:01.0 to 64 > [ 0.162552] NET: Registered protocol family 2 > [ 0.162965] IP route cache hash table entries: 2048 (order: 1, 8192 > bytes) > [ 0.163955] TCP established hash table entries: 8192 (order: 4, 65536 > bytes) > [ 0.164479] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.164733] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.164747] TCP reno registered > [ 0.165095] NET: Registered protocol family 1 > [ 0.165694] checking if image is initramfs... it is > [ 3.481313] Freeing initrd memory: 7028k freed > [ 3.484434] audit: initializing netlink socket (disabled) > [ 3.484530] type=2000 audit(1238247295.484:1): initialized > [ 3.484990] Total HugeTLB memory allocated, 0 > [ 3.485315] VFS: Disk quotas dquot_6.5.1 > [ 3.485470] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 3.485670] msgmni has been set to 500 > [ 3.486191] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 253) > [ 3.486212] io scheduler noop registered > [ 3.486223] io scheduler anticipatory registered > [ 3.486234] io scheduler deadline registered > [ 3.486286] io scheduler cfq registered (default) > [ 3.486340] PCI: VIA PCI bridge detected.Disabling DAC. > [ 3.486363] pci 0000:00:07.0: Activating ISA DMA hang workarounds > [ 3.486427] pci 0000:01:00.0: Boot video device > [ 3.487738] isapnp: Scanning for PnP cards... > [ 3.583833] pnp 01:01.03: CMI8330 quirk - forced possible IRQs to 5, 7, > 10 and DMA channels to 1, 3 > [ 3.584039] 01:01: card 'CMI8330/C3D Audio Adapter' > [ 3.584072] isapnp: 1 Plug & Play card detected total > [ 3.596009] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ > sharing enabled > [ 3.596372] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 3.597025] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A > [ 3.598037] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 3.605058] brd: module loaded > [ 3.605493] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 > [ 3.606082] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 3.606109] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 3.606715] mice: PS/2 mouse device common for all mice > [ 3.607270] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 3.607321] rtc0: alarms up to one day > [ 3.607756] EISA: Probing bus 0 at eisa.0 > [ 3.607811] Cannot allocate resource for EISA slot 5 > [ 3.607844] EISA: Detected 0 cards. > [ 3.607861] cpuidle: using governor ladder > [ 3.607872] cpuidle: using governor menu > [ 3.607896] No iBFT detected. > [ 3.610145] TCP cubic registered > [ 3.610163] NET: Registered protocol family 17 > [ 3.610219] Using IPI Shortcut mode > [ 3.610745] registered taskstats version 1 > [ 3.611174] rtc_cmos 00:03: setting system clock to 2009-03-28 13:34:56 > UTC (1238247296) > [ 3.613704] Freeing unused kernel memory: 320k freed > [ 3.635547] input: AT Translated Set 2 keyboard as /class/input/input0 > [ 4.180251] thermal: Unknown symbol acpi_processor_set_thermal_limit > [ 5.848596] Uniform Multi-Platform E-IDE driver > [ 5.848631] ide: Assuming 33MHz system bus speed for PIO modes; override > with idebus=xx > [ 5.994236] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker > [ 5.994360] PCI: setting IRQ 11 as level-triggered > [ 5.994374] PCI: Found IRQ 11 for device 0000:00:08.0 > [ 5.995653] eth0: RealTek RTL-8029 found at 0xe800, IRQ 11, > 00:c0:df:ea:1a:64. > [ 6.305013] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot > 0000:00:07.1 > [ 6.305075] VP_IDE: not 100% native mode: will probe irqs later > [ 6.305155] VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on > pci0000:00:07.1 > [ 6.305192] ide0: BM-DMA at 0xe000-0xe007 > [ 6.305222] ide1: BM-DMA at 0xe008-0xe00f > [ 6.305240] Probing IDE interface ide0... > [ 6.371640] Floppy drive(s): fd0 is 1.44M > [ 6.420458] usbcore: registered new interface driver usbfs > [ 6.420598] usbcore: registered new interface driver hub > [ 6.420814] usbcore: registered new device driver usb > [ 6.429000] USB Universal Host Controller Interface driver v3.0 > [ 6.443973] FDC 0 is a post-1991 82077 > [ 6.724215] hda: FUJITSU MPF3102AT, ATA DISK drive > [ 7.172241] hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive > [ 7.228330] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > [ 7.228784] hda: UDMA/33 mode selected > [ 7.229229] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3 > [ 7.229524] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO3 > [ 7.229803] Probing IDE interface ide1... > [ 8.092200] hdc: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive > [ 8.876218] hdd: GCR-8523B, ATAPI CD/DVD-ROM drive > [ 8.932261] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > [ 8.932393] hdc: UDMA/33 mode selected > [ 8.932575] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > [ 8.932651] hdd: MWDMA2 mode selected > [ 8.934259] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > [ 8.934392] ide1 at 0x170-0x177,0x376 on irq 15 > [ 8.935171] uhci_hcd 0000:00:07.2: UHCI Host Controller > [ 8.935685] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus > number 1 > [ 8.935744] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400 > [ 8.936298] usb usb1: configuration #1 chosen from 1 choice > [ 8.936463] hub 1-0:1.0: USB hub found > [ 8.936517] hub 1-0:1.0: 2 ports detected > [ 8.996645] SCSI subsystem initialized > [ 9.053795] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0001 > [ 9.053817] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 9.053832] usb usb1: Product: UHCI Host Controller > [ 9.053843] usb usb1: Manufacturer: Linux 2.6.26-1-486 uhci_hcd > [ 9.053855] usb usb1: SerialNumber: 0000:00:07.2 > [ 9.059625] libata version 3.00 loaded. > [ 9.459763] hda: max request size: 128KiB > [ 9.463402] hda: 20015856 sectors (10248 MB) w/512KiB Cache, > CHS=19857/16/63 > [ 9.463428] hda: cache flushes not supported > [ 9.463636] hda:ide-floppy driver 1.00 > [ 9.508237] hda1 hda2 < hda5 > > [ 9.729008] hdb: No disk in drive > [ 9.825564] hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 > rpm > [ 9.827970] hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache > [ 9.828004] Uniform CD-ROM driver Revision: 3.20 > [ 9.830996] hdd: ATAPI 52X CD-ROM drive, 128kB Cache > [ 10.174274] PM: Starting manual resume from disk > [ 10.364248] kjournald starting. Commit interval 5 seconds > [ 10.364293] EXT3-fs: mounted filesystem with ordered data mode. > [ 13.577121] udevd version 125 started > [ 17.618221] input: PC Speaker as /class/input/input1 > [ 20.768069] Linux agpgart interface v0.103 > [ 21.038156] agpgart: Detected VIA Apollo MVP3 chipset > [ 21.041138] agpgart: AGP aperture is 64M @ 0xe0000000 > [ 21.252887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 21.354622] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 21.874392] Error: Driver 'pcspkr' is already registered, aborting... > [ 22.404751] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 > [ 23.435116] sb: Init: Starting Probe... > [ 23.437766] OSS SndBlstr 01:01.03: activated > [ 23.437801] sb: PnP: Found Card Named = "CMI8330/C3D Audio Adapter", > Card PnP id = CMI0001, Device PnP id = @x...@0001 > [ 23.437822] sb: PnP: Detected at: io=0x220, irq=5, dma=1, dma16=5 > [ 23.437950] SB 4.13 detected OK (220) > [ 23.442279] sb: Init: Done > [ 23.854678] parport_pc 00:0e: reported by Plug and Play BIOS > [ 23.854760] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > [ 23.949273] ns558 01:01.02: activated > [ 23.978400] gameport: NS558 PnP Gameport is pnp01:01.02/gameport0, io > 0x200, speed 710kHz > [ 24.000691] no ALS100 based soundcards found > [ 24.044224] no DT-019X / ALS-007 based soundcards found > [ 24.110783] no ALS100 based soundcards found > [ 24.143158] no DT-019X / ALS-007 based soundcards found > [ 24.258826] no DT-019X / ALS-007 based soundcards found > [ 24.303648] cmi8330: PnP detection failed > [ 26.977790] Adding 465844k swap on /dev/hda5. Priority:-1 extents:1 > across:465844k > [ 27.653541] EXT3 FS on hda1, internal journal > [ 28.476079] loop: module loaded > [ 35.200800] NET: Registered protocol family 10 > [ 35.202881] lo: Disabled Privacy Extensions > [ 36.991153] lp0: using parport0 (interrupt-driven). > [ 37.128062] ppdev: user-space parallel port driver > [ 45.636653] eth0: no IPv6 routers present > [ 348.771195] end_request: I/O error, dev fd0, sector 13 > [ 348.771242] Buffer I/O error on device fd0p44, logical block 1 > [ 353.976047] end_request: I/O error, dev fd0, sector 13 > [ 353.976092] Buffer I/O error on device fd0p44, logical block 1 > > > -- > Victor Henrique Gonçalves >
