-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Jean-Luc Coulon (f5ibh) a écrit : | Le 14.01.2005 20:34:15, mahashakti89 a écrit : | | [ ... ] | |> |> Oui, je sais mais ça ne donne rien ... | | | Donnez-donc votre fichier de config grub en entier. | |
Voici la chose, ceci dit , j'ai remarqué que le script d'installation mentionne ceci : Searching for splashimages : none found Sont ce les images du boosplash ou les images du splashscreen propres à Grub ? Merci mahashakti89 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Debian - http://enigmail.mozdev.org iD8DBQFB6CX/PPuyRSaD7LoRAkWSAJ9yisTRdmmkuFEA/aCVoop5eb8mvgCglBeI EI9nz9TRZZcsJm0gTse1Scc= =uYD/ -----END PGP SIGNATURE-----
# menu.lst - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 10 # Pretty colours color cyan/blue white/blue # Emulation d'un clavier azerty_FR setkey less backquote setkey greater tilde setkey ampersand 1 setkey 1 exclam setkey tilde 2 setkey 2 at setkey doublequote 3 setkey 3 numbersign setkey quote 4 setkey 4 dollar setkey parenleft 5 setkey 5 percent setkey minus 6 setkey 6 caret setkey backquote 7 setkey 7 ampersand setkey underscore 8 setkey 8 asterisk setkey backslash 9 setkey 9 parenleft setkey at 0 setkey 0 parenright setkey parenright minus setkey numbersign underscore setkey a q setkey A Q setkey z w setkey Z W setkey caret bracketleft setkey dollar bracketright setkey q a setkey Q A setkey m semicolon setkey M colon setkey bracketleft quote setkey percent doublequote setkey asterisk backslash setkey bracketright bar setkey w z setkey W Z setkey comma m setkey question M setkey semicolon comma setkey period less setkey colon period setkey slash greater setkey exclam slash setkey bar question ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST #Splash_menu splashimage=(hd0,0)/grub/images/grub-splash-debblue.xpm.gz 16.7 Mill. (24bit)|795 # vga=xxx sets the framebuffer console to a specific resolution. # Here is a table you can use so it can help you decide # what resolution you want to use: # colour depth | 640x480 800x600 1024x768 1280x1024 # 256 (8bit) | 769 771 773 775 # 32000 (15bit)| 784 787 790 793 # 65000 (16bit)| 785 788 791 794 # 16.7 Mill. (24bit) | 786 789 792 795 ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default optons below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specifiv kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro # kopt=root=/dev/hda3 ro hdc=ide-cd hdd=ide-cd splash=silent vga=791 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,0) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery mode) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## ## End Default Options ## title Debian GNU/Linux, kernel 2.6.10-ck4 root (hd0,0) kernel /vmlinuz-2.6.10-ck4 root=/dev/hda3 ro hdc=ide-cd hdd=ide-cd splash=silent vga=792 initrd /initrd.splash savedefault boot title Debian GNU/Linux, kernel 2.6.10-ck4 (recovery mode) root (hd0,0) kernel /vmlinuz-2.6.10-ck2 root=/dev/hda3 ro single savedefault boot title Debian GNU/Linux, kernel 2.6.10-ck2 root (hd0,0) kernel /vmlinuz-2.6.10-ck2 root=/dev/hda3 ro hdc=ide-cd hdd=ide-cd splash=silent vga=791 initrd /initrd.splash savedefault boot title Debian GNU/Linux, kernel 2.6.10-ck2 (recovery mode) root (hd0,0) kernel /vmlinuz-2.6.10-ck2 root=/dev/hda3 ro single savedefault boot title Debian GNU/Linux, kernel 2.6.7-ck6 root (hd0,0) kernel /vmlinuz-2.6.7-ck6 root=/dev/hda3 ro hdc=idecd hdd=ide-cd splash=silent vga=792 initrd /initrd.splash savedefault boot title Debian GNU/Linux, kernel 2.6.7-ck6 (recovery mode) root (hd0,0) kernel /vmlinuz-2.6.7-ck6 root=/dev/hda3 ro single savedefault boot title Debian GNU/Linux, kernel memtest86+ root (hd0,0) kernel /memtest86+.bin savedefault boot ### END DEBIAN AUTOMAGIC KERNELS LIST #path_for_splashimage initrd /initrd.splash # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/hdb1 title Windows 95/98/NT/2000 root (hd1,0) makeactive chainloader +1 map (hd0) (hd1) map (hd1) (hd0)
