pierre a écrit :
Jean-Luc Coulon (f5ibh) a écrit :Le 28.12.2004 22:57:05, pierre a écrit :
désolé pour la longueur. bon voilà les résultats des diffèrents essais que j'ai fait. d'abord pierre:/home/tux# cdrecord dev=ATA=1,1,0 warty-release-live-i386.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode.cdrecord: Future versions of cdrecord may have different drive dependent default s.
cdrecord: Continuing in 5 seconds...Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schillin g NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<[EMAIL PROTECTED] org>.
The original author should not be bothered with problems of this
version.
cdrecord: Invalid argument. Invalid bus or target specifier in 'ATA=1,1,0'. Cann ot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. cdrecord: cdrecord: For more information, install the cdrtools-doc cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup . même message en user. après k3b: en user je n'ai pas de graveur accessible. en root le message suivant: System ----------------------- K3b Version:0.11.12 KDE Version: 3.2.3 QT Version: 3.3.3 cdrecord ----------------------- scsidev: '/dev/hdd' devname: '/dev/hdd' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to
<[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : SYNC Vendor_info : 'YAMAHA ' Identifikation : 'CRW2100E ' Revision : '1.0H' Device seems to be: Generic mmc CD-RW. Current: 0x0009 Profile: 0x0008 Profile: 0x0009 (current) Profile: 0x000A Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-2 SWABAUDIO Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 7582848 = 7405 KB FIFO size : 4194304 = 4096 KB Track 01: data 522 MB Total size: 600 MB (59:28.85) = 267664 sectors Lout start: 600 MB (59:30/64) = 267664 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11655 (97:26/45) ATIP start of lead out: 359848 (79:59/73) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 6 Manufacturer: FUJI Photo Film Co., Ltd. Blocks total: 359848 Blocks current: 359848 Blocks remaining: 92184 Starting to write CD/DVD at speed 16 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 522 MB written. Track 01: 1 of 522 MB written (fifo 98%) [buf 21%] 72.0x. ================snap============================================================ Track 01: 522 of 522 MB written (fifo 100%) [buf 99%] 8.1x. Track 01: Total bytes read/written: 548175872/548175872 (267664 sectors). Writing time: 495.141s Average write speed 7.7x. Min drive buffer fill was 99% Fixating... Fixating time: 19.546s /usr/bin/cdrecord: fifo had 8635 puts and 8635 gets./usr/bin/cdrecord: fifo was 0 times empty and 8479 times full, min fill was 67%.
*cdrecord comand*: -----------------------/usr/bin/cdrecord.mmap -v gracetime=2 dev=/dev/hdd speed=40 -dao -eject -data /mnt/musique/Musique/Pierre/Iso/warty-release-install-i386.iso
en copiant la même *ligne* en user dans une console ça marche. mais rien avec k3b encore merci de l'aide apportée Pierre
signature.asc
Description: OpenPGP digital signature
