minux:/# mkinitrd -o /boot/initrd.img-2.6.9 /lib/modules/2.6.9/
/usr/sbin/mkinitrd: add_modules_dep_2_5: modprobe failed
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
*FATAL: Module sata_nv not found.*
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
*FATAL: Module sd_mod not found.*
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
WARNING: /etc/modprobe.d/reseau line 1: ignoring bad line starting with
'lais'
voila sur quoi je bloque...
le warning est due a un bug de ma carte gigabit ethernet qu'il faut
reconfigurer pour le 1M
seulement je n'arrive pas a trouver l'origine des lignes FATAL erreur!!!
pourtant dans le #make menuconfig, j'ai activer les options
correspondant sans resultat!
A savoir... <*> SCSI device support
<*> SCSI disk support
Ainsi que... <*>nforce sata driver
Pour info voila ce que me donne mon #lspci :
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System
Management (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation CK8S USB Controller (rev a2)
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3
250Gb AC'97 Audio Controller (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA
Controller (v2.5) (rev a2)
0000:00:09.0 IDE interface: nVidia Corporation CK8S Serial ATA
Controller (v2.5) (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to
PCI Bridge (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI
Bridge (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350
[Radeon 9800 Pro]
0000:01:00.1 Display controller: ATI Technologies Inc Radeon R350
[Radeon 9800 Pro] (Secondary)
0000:02:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
quelqu'un a-t-il deja rencontré un tel problem? (c probable)
mais qu'elqu'un l'a-t-il resolu?
merci de vos reponses...
